X-am® 8000
Dräger X-am® 8000 measures up to seven toxic as well as flammable gases, vapors and oxygen all at once — either in pump or diffusion mode. The internal pump can be connected with hoses of up to 45 meters in length.
Availability: Commercially Available
+1 800 437 2437
7256 South Sam Houston Parkway, Suite 100
Houston, TX 77085
USA
|
+49 451 8842
Moislinger Allee 53-77
23580 Lübeck
Germany
|
www.draeger.com
Manufacturer |
| Dräger Safety, Inc. |
Product Name |
| X-am® 8000 |
Detection Category |
| Chemical; |
Detection Principle |
| Sensors; |
Detection Method |
| Photoionization Detection; |
Application |
| Gas Analysis; |
Equipment Type |
| Instrument |
Product Synopsis |
| Dräger X-am® 8000 measures up to seven toxic as well as flammable gases, vapors and oxygen all at once — either in pump or diffusion mode. The internal pump can be connected with hoses of up to 45 meters in length. |
Availability |
| Commercially Available |
Technology Readiness Level (TRL) |
| 9 |
User Feedback Sources |
| Indifferent/No user feedback |
Dimensions |
| 7.0 x 3.0 x 1.7 in (17.9 x 7.7 x 4.2 cm) |
Weight |
| <5 Lbs.; 17.5 oz (495 g) |
Power Requirements |
| Lithium Battery; 20 hours |
Noise Produced |
| 100 dB |
Transportability |
| Handheld |
Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; IP67, rubber boot |
Operating Conditions |
| -20 to 50°C (-4 to 122°F), < 90% RH non-condensing |
Consumables |
| <$1,000/year; Sensors |
Solvents/Reagents |
| Calibration gases |
Calibration Schedule |
| Bump test and calibration are carried out using the Dräger X-dock® calibrating station. |
Suggested Routine Maintenance |
| None |
Available Accessories |
| Shoulder strap, pump adapter, pre-tube holder |
Data Analysis Support Equipment |
| X-dock Manager PC software |
Communications Interface |
| USB Dira Dongle / IR interface |
Expected Operational Life |
| Indefinite |
Shelf Life |
| >5 years |
Maintenance Cost |
| None |
Other Chemical Targets |
| Oxygen, carbon dioxide, hydrogen sulfide, nitrogen dioxide, sulfur dioxide |
Adaptability |
| No; cannot detect or add new targets |
Sample Introduction |
| Vapor/Gas; |
Sensitivity/Detection Limits |
| ppm |
Start Up Time (From Cold Start To Sample Ready) |
| < 60 seconds |
Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
Total Run Time |
| Continuous monitor |
Alarm Capability |
| Audible, visual, and vibrational |
Software Control |
| On-board |
Other Operational Parameters |
| 12 MB storage |
Training Required |
| <1 day training |
Training Available |
| Yes |
Manuals Available |
| Yes |
Warranties |
| 3 year |
IATA Shipping Restrictions |
| Yes; Lithium-ion battery |