SC-01
The SC-01 is a handheld single toxic gas monitor, with sensors available for detection of Ammonia (NH3), Arsine (ASH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Cyanide (HCN), Hydrogen Sulfide (H2S), Phosphine (PH3), and Sulfur Dioxide (SO2). The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes.
Availability: Commercially Available
| Manufacturer |
| RKI Instruments |
| Product Name |
| SC-01 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Gas Analysis; |
| Product Model Number |
| SC-01 |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The SC-01 is a handheld single toxic gas monitor, with sensors available for detection of Ammonia (NH3), Arsine (ASH3), Carbon Monoxide (CO), Chlorine (Cl2), Hydrogen Cyanide (HCN), Hydrogen Sulfide (H2S), Phosphine (PH3), and Sulfur Dioxide (SO2). The smart sensors are interchangeable, with the SC-01 automatically recognizing any sensor change without any set up or configuration changes. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 2.5 x 5.2 x 1.2 in (6.3 x 13.1 x 3.1 cm) |
| Weight |
| <1 lb.; 7.6 oz (215 g) |
| Power Requirements |
| Alkaline Battery; Two AA alkaline batteries (250 hours) |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; |
| Operating Conditions |
| -20 to 50°C (-4 to 122°F), 0 to 95% RH, non-condensing |
| Consumables |
| <$1,000/year; Calibration gases, filters, sensors |
| Calibration Schedule |
| Depends on use; weekly or monthly under normal use. |
| Suggested Routine Maintenance |
| Charge and replace batteries, replace sensor |
| Available Accessories |
| Belt clip; data logging software; extender cable (3 meter) |
| Data Analysis Support Equipment |
| Optional Data Logger Management Program provides ability to download, view, print, and save data logs. Requires Windows XP or later. |
| Communications Interface |
| IrDA or USB with IrDA adapter |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $745.00 |
| Maintenance Cost |
| ~ $500/year for replacement sensor, filter disk, and calibration gases |
| Other Chemical Targets |
| Ammonia: 0-75 ppm
Arsine: 0-1.5 ppm
Caron monoxide: 0-75 ppm
Chlorine: 0-3.00 ppm
Hydrogen cyanide: 0-15 ppm
Hydrogen sulfide: 0-30 ppm
Phosphine: 0-1.00 ppm
Sulfur dioxide: 0-6.0 ppm |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| 1 to 2 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Audible, Visual and Vibrational |
| Training Required |
| <1 day training |
| Training Available |
| No |
| Manuals Available |
| Yes |
| Warranties |
| 2 years material and workmanship |
| Approved Vendors |
| Multiple |
| Data File Type Format |
| Proprietary |
