ToxiRAE Pro
The ToxiRAE Pro is a wireless personal single-gas monitor. ToxiRAE Pro instruments monitor selected common toxic industrial gases (ToxiRAE Pro), volatile organic compounds (ToxiRAE Pro PID), combustible gases (ToxiRAE Pro LEL), and carbon dioxide (ToxiRAEPro CO2). Only one sensor is used at a time, may be dependent on model selected.
Availability: Commercially Available
Manufacturer |
| Honeywell Analytics |
Product Name |
| ToxiRAE Pro |
Detection Category |
| Chemical; |
Detection Principle |
| Sensors; |
Detection Method |
| Electrochemical Detection; Photoionization Detection ; |
Application |
| Emergency Response; Gas Analysis; |
Equipment Type |
| Instrument |
Product Synopsis |
| The ToxiRAE Pro is a wireless personal single-gas monitor. ToxiRAE Pro instruments monitor selected common toxic industrial gases (ToxiRAE Pro), volatile organic compounds (ToxiRAE Pro PID), combustible gases (ToxiRAE Pro LEL), and carbon dioxide (ToxiRAEPro CO2). Only one sensor is used at a time, may be dependent on model selected. |
Availability |
| Commercially Available |
Technology Readiness Level (TRL) |
| 9 |
User Feedback Sources |
| Indifferent/No user feedback |
Supporting Documentation |
| Docs: RAE Systems-ToxiRAE Pro.pdf; |
Dimensions |
| 4.6 x 2.4 x 1.2 in (117 x 61 x 36 mm) |
Weight |
| <1 Lb.; 7.76 oz. (220 g) |
Power Requirements |
| Lithium Battery; Rechargeable |
Noise Produced |
| 95 dB |
Transportability |
| Handheld |
Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; IP-65 |
Operating Conditions |
| -20 to 55 C (-4 to 131°F); 0 to 95%Rh, non-condensing |
Consumables |
| <$1,000/year; Calibration Gas |
Solvents/Reagents |
| Calibration Gas |
Calibration Schedule |
| Yes |
Available Accessories |
| AutoRAE 2 Automatic Test and Calibration System; Multi-unit charging station for up to 5 monitors, Wrist Strap, protective rubber boot |
Communications Interface |
| Built-in RF modem, PC Communication Cable |
Expected Operational Life |
| Indefinite |
Shelf Life |
| <1 year |
Unit Cost |
| $399.00 |
Maintenance Cost |
| $280 to $780 every 1 to 3 depending on the sensors |
Tested For ITF-25 TIC/TIMs |
| H2S, CO, O2, NH3, CI2, CIO2, HCN, NO,
NO2, PH3, and SO2 |
Other Chemical Targets |
| Yes |
Sample Introduction |
| Vapor/Gas |
Sensitivity/Detection Limits |
| ppm |
Known Interferents/Inhibitors |
| Depends on the analyte of interest, see Data sheet for specific chemical sensitivity |
Start Up Time (From Cold Start To Sample Ready) |
| Seconds |
Response Time (Sample Application To Output) |
| Continuous (<30 seconds); < 12 seconds |
Total Run Time |
| Minutes |
Alarm Capability |
| Audible, visual and vibrational |
Software Control |
| On-board, Remote |
Other Operational Parameters |
| Event logging of up to 10 events,Intrinsically safe, Field-replaceable filter and battery |
Training Required |
| <1 day training |
Training Available |
| Yes |
Manuals Available |
| Yes |
Warranties |
| 2 years on non-consumable components and CO, H2S, and O2 sensors 1 year on all other sensors, battery, and other consumable parts |
IATA Shipping Restrictions |
| Yes; Li-ion batteries |
Approved Vendors |
| Multiple |
Data File Type Format |
| Not Specified |