SAFEAIR®
The SafeAir® system consists of a direct reading colorimetric badge and a color comparison chart. SafeAir® badges are available for 21 different gases. Provides immediate visual indication when specific chemical is present. Homogeneous and stable color formation due to coated indicator layer.
Availability: Commercially Available
+1 800 808 2234
2557 Production Road
Virginia Beach, VA 23454
USA
|
|
www.morphtec.com
| Manufacturer |
| Morphix Technologies |
| Product Name |
| SAFEAIR® |
| Detection Category |
| Chemical |
| Detection Principle |
| Colorimetric; |
| Detection Method |
| Colorimetric; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The SafeAir® system consists of a direct reading colorimetric badge and a color comparison chart. SafeAir® badges are available for 21 different gases. Provides immediate visual indication when specific chemical is present. Homogeneous and stable color formation due to coated indicator layer. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 2.9 x 1.6 x 0.04 in (7.3 x 4 x 0.1 cm) |
| Weight |
| <5 lbs.; 3.3 lb (1.5 g) |
| Power Requirements |
| None |
| Transportability |
| Pocket Size |
| Operating Conditions |
| Operates in most environments |
| Available Accessories |
| Strap clip needed to hold badge to clothing |
| Shelf Life |
| <1 year; Badges may be refrigerated in sealed pouch for up to 1 year |
| Unit Cost |
| $165 for box of 50 |
| Tested For ITF-25 TIC/TIMs |
| Ammonia, aniline, carbon dioxide, carbon monoxide, chlorine, chlorine dioxide, dimethyl amine, formaldehyde, hydrazine, hydrides, hydrogen chloride, hydrogen sulfide, MDI, mercury, nitrogen dioxide, ozone, phosgene, sulfur dioxide, TDI, and UDMH |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; ppb |
| Known Interferents/Inhibitors |
| Cross interferences are listed in the operating instructions for each analyte badge. Example: for the chlorine badge, bromine and iodine are known cross-interferences, and hydrogen chloride and hydrochloric acid at concentrations greater than 1 ppm can seriously impair the performance of the badge. |
| Start Up Time (From Cold Start To Sample Ready) |
| 30 seconds |
| Response Time (Sample Application To Output) |
| <5 minutes; 2 minutes |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Visual Alarm (color change) |
| Training Required |
| <1 hour training |
| Training Available |
| No |
| Manuals Available |
| Operating instructions included in each box |
| Reachback Service |
| No |
| Warranties |
| Guaranteed accurate throughout the shelf life period. Labeled with expiration date. |
| Approved Vendors |
| Amazon.com |
