MAX Nitric Dioxide Sensors
Maxtec offers three different electrochemical sensors for the detection of nitric dioxide for industrial applications.
Availability: Commercially Available
| Manufacturer |
| Maxtec |
| Product Name |
| MAX Nitric Dioxide Sensors |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection ; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| Maxtec offers three different electrochemical sensors for the detection of nitric dioxide for industrial applications. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 1.23 x 1.69 in (32 x 43 mm) |
| Weight |
| <1 lb. |
| Transportability |
| Pocket Size |
| Operating Conditions |
| 0 to 50°C Operating Temperature 5 to 25°C Recommended Storage Temperature -20 to 60°C Maximum Storage Temperature 750 – 1250 hPa Operating Pressure 10 – 98% Operating Relative Humidity |
| Other Chemical Targets |
| Nitrogen Dioxide |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Known Interferents/Inhibitors |
| Potential Interferents: Hydrogen Sulfide, Carbon Monoxide, Hydrogen, Nitrogen Oxide, Sulfur Dioxide |
| Start Up Time (From Cold Start To Sample Ready) |
| < 1 hour when connected to bias |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); 90% Response Time <15 seconds @ flow rates of 0.2-2.0 l/min |
| Alarm Capability |
| Output signal |
| Training Required |
| <1 hour training |
| Manuals Available |
| Yes – Spec sheets |
| Warranties |
| Two year warranty |
