HazCat Rocket Fuel Identification
The HazCat® Rocket Fuel Test Kit is a two-part test for identifying components of rocket fuel. One test identifies aluminum metal and/or ammonium perchlorate. A second test identifies aged, oxidized aluminum if the first test is negative. The test is performed in water, reducing the chance of accidental ignition.
Availability: Commercially available
Stacia Law
+1 800 543 5487
P.O. Box 929 3919 Bootjack Lane
Mariposa, CA 95338
|
|
www.hazcat.com
Manufacturer |
| Haztech Systems, Inc. |
Product Name |
| HazCat Rocket Fuel Identification |
Detection Category |
| Chemical |
Detection Principle |
| Colorimetric; |
Detection Method |
| Colorimetric; |
Application |
| Emergency Response; |
Product Model Number |
| KT1036 |
Equipment Type |
| Instrument |
Product Synopsis |
| The HazCat® Rocket Fuel Test Kit is a two-part test for identifying components of rocket fuel. One test identifies aluminum metal and/or ammonium perchlorate. A second test identifies aged, oxidized aluminum if the first test is negative. The test is performed in water, reducing the chance of accidental ignition. |
Availability |
| Commercially available |
Technology Readiness Level (TRL) |
| 9 |
User Feedback Sources |
| Indifferent/No user feedback |
Dimensions |
| 16 × 20 × 8 in (407 x 508 x 204 mm) |
Weight |
| <30 lbs.; 10 lbs (4.5 kg) |
Power Requirements |
| None |
Transportability |
| Handheld |
Ruggedness |
| Waterproof/Resistant; Watertight protective pelican case |
Operating Conditions |
| Sensitive to extreme temperatures |
Consumables |
| <$1,000/year; dependent on use. Disposable test tubes, pipettes, scoops, test strips, and reagents |
Solvents/Reagents |
| Water solubility test; perchlorate test; sodium hydroxide; metal extraction test; aluminum test |
Suggested Routine Maintenance |
| Expiration dates of reagents should be periodically checked. Replace reagents as required. |
Available Accessories |
| Hardware, cases, additional solvents |
Expected Operational Life |
| Reagent shelf life |
Shelf Life |
| <1 year |
Unit Cost |
| $490.00 |
Maintenance Cost |
| < $300 per year |
Tested For ITF-25 TIC/TIMs |
| Yes |
Tested For Explosives |
| Yes |
Other Chemical Targets |
| Aluminum metal, ammonium perchlorate, rocket fuel |
Sample Introduction |
| Solid |
Sensitivity/Detection Limits |
| ppm |
Start Up Time (From Cold Start To Sample Ready) |
| < 1 minute |
Response Time (Sample Application To Output) |
| >15 minutes; 20 minutes |
Total Run Time |
| Seconds |
Training Required |
| <1 day training |
Training Available |
| Available at manufacturer’s site or at customer facility |
Manuals Available |
| User manual and MSDS manual, flow charts, and field sheet packets |
Warranties |
| 1 year |
IATA Shipping Restrictions |
| Title 29 CFR 1910.120 Req. for ID, IATA shipping confirmation. Exempt-level quantities of reagents |
Approved Vendors |
| None |