Tango TX2
The Tango TX2 is the most accurate two-gas monitor featuring individual sensors that increase alarm accuracy. A two-year runtime and replaceable battery simplify gas detection management by eliminating the need for charging infrastructure.
Availability: Commercially Available
| Manufacturer |
| Industrial Scientific Corporation |
| Product Name |
| Tango TX2 |
| Detection Category |
| Chemical; |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Emergency Response;Screening; |
| Product Model Number |
| Tango TX2 |
| Equipment Type |
| Instrument; |
| Product Synopsis |
| The Tango TX2 is the most accurate two-gas monitor featuring individual sensors that increase alarm accuracy. A two-year runtime and replaceable battery simplify gas detection management by eliminating the need for charging infrastructure. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Supporting Documentation |
| Docs: tango-tx2_specsheet_en.pdf; 17160218-1-tango-tx2-product-manual_en.pdf; |
| Dimensions |
| 99 x 51 x 35 mm (3.9 x 2.0 x 1.4 in) |
| Weight |
| <1 lb.;126.0 g (4.4 oz) |
| Power Requirements |
| 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable; non rechargeable; always on; up to 2-year run time depending on operating conditions |
| Noise Produced |
| 100 dB alarm |
| Transportability |
| Handheld; |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; IP66/67. Case top: Polycarbonate with a protective rubber overmold |
| Operating Conditions |
| -40 °C to 50 °C (-40 °F to 122 °F); 15% to 95% Non-condensing (continuous) |
| Consumables |
| <$1,000/year; Sensors |
| Available Accessories |
| Docking station; replacement battery; case; dust barrier kit; water barrier kit; suspender clip; AlarmAmp |
| Expected Operational Life |
| Indefinite |
| Maintenance Cost |
| None |
| Tested For Chemical Agents |
| No |
| Tested For ITF-25 TIC/TIMs |
| No |
| Tested For Explosives |
| No |
| Tested For Narcotics |
| No |
| Other Chemical Targets |
| CO, CO/H2, H2S, NO2, and SO2 |
| Tested For Biological Agents |
| No |
| Other Biological Targets |
| No |
| Radiological Targets |
| No |
| Adaptability |
| No; cannot detect or add new targets |
| Sample Introduction |
| Vapor/Gas; |
| Start Up Time (From Cold Start To Sample Ready) |
| Seconds |
| Total Run Time |
| Continuous (<30 seconds) |
| Alarm Capability |
| Audible, visual, and vibrational |
| Other Operational Parameters |
| 3 months at 10-second intervals |
| Manuals Available |
| Yes |
| Warranties |
| Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for three years. All other sensors are warranted for two years. |
