Codeac Solutions Nuclear Detection Wipe
The Nuclear Detection Wipe is a pocket sized single-use wet wipe which enables the user to detect nuclear contamination of Uranium, Plutonium, Americium, Cobalt and Primary Transition Metals. Tear, remove the wipe and wipe the surface. If contamination is detected there will be definitive colorimetric results in less than 60 seconds.
Availability: Commercially Available: 60 to 90 days for delivery
| Manufacturer |
| Codeac Solutions |
| Product Name |
| Codeac Solutions Nuclear Detection Wipe |
| Detection Category |
| Radiological/Nuclear; |
| Detection Principle |
| Colorimetric; |
| Detection Method |
| Colorimetric; |
| Application |
| Screening; |
| Equipment Type |
| Wet Chemistry; |
| Product Synopsis |
| The Nuclear Detection Wipe is a pocket sized single-use wet wipe which enables the user to detect nuclear contamination of Uranium, Plutonium, Americium, Cobalt and Primary Transition Metals. Tear, remove the wipe and wipe the surface. If contamination is detected there will be definitive colorimetric results in less than 60 seconds. |
| Availability |
| Commercially Available: 60 to 90 days for delivery |
| Technology Readiness Level (TRL) |
| TRL 9 |
| Market Entry Date |
| 2022 |
| Dimensions |
| 8.6cm x 7cm |
| Weight |
| 5grams |
| Power Requirements |
| No |
| Noise Produced |
| No |
| Transportability |
| Pocket Size;Person-Portable; |
| Calibration Schedule |
| No calibration required |
| Shelf Life |
| 2 Years |
| Maintenance Cost |
| No Maintenance Required |
| Other Chemical Targets |
| Uranium, Plutonium, Americium, Cobalt, Primary Transition Metals |
| Sample Introduction |
| Liquid;Solid; |
| Start Up Time (From Cold Start To Sample Ready) |
| >1min |
| Response Time (Sample Application To Output) |
| >1min |
| Total Run Time |
| >1min |
| Training Required |
| No |
| Manuals Available |
| Laminated instructions manual, Operating Manual and color standard card |
