6495C Triple Quad LC/MS
The 6495C triple quadrupole LC/MS system is the highest performance LC/TQ available from Agilent, and is ideally suited for peptide quantitation as well as applications that require ppt sensitivity. The system features a third-generation iFunnel design and VacShield for easy maintenance.
Availability: Commercially Available
+1 816 427 5510
5301 Stevens Creek Boulevard
Santa Clara, CA 95051
USA
|
|
www.agilent.com
| Manufacturer |
| Agilent Technologies |
| Product Name |
| 6495C Triple Quad LC/MS |
| Detection Category |
| Chemical; Biological; Explosives; |
| Detection Principle |
| Spectrometry; Chromatography; |
| Detection Method |
| Liquid Chromatography; Quadrupole Mass Spectrometry; |
| Application |
| Laboratory Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The 6495C triple quadrupole LC/MS system is the highest performance LC/TQ available from Agilent, and is ideally suited for peptide quantitation as well as applications that require ppt sensitivity. The system features a third-generation iFunnel design and VacShield for easy maintenance. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 18.7 x 30.4 x 36 in. (47.5 x 77.3 x 91.5 cm) |
| Weight |
| >50 Lbs. |
| Power Requirements |
| AC/DC Line Power |
| Noise Produced |
| None |
| Transportability |
| Benchtop/Fixed |
| Ruggedness |
| Indoor Use Only |
| Consumables |
| >$1,000/year |
| Solvents/Reagents |
| Mobile Phase components and solvents for standards |
| Calibration Schedule |
| Calibration required for each target chemical to determine LC retention time and detector response. |
| Data Analysis Support Equipment |
| MassHunter Software |
| Communications Interface |
| USB, Ethernet, RS232 |
| Expected Operational Life |
| >10 years |
| Shelf Life |
| >5 years; Product lifetime indefinite with routine maintenance. Serviceability for ten years |
| Tested For Chemical Agents |
| Amenable based on technology |
| Tested For ITF-25 TIC/TIMs |
| Amenable based on technology |
| Tested For Explosives |
| Amenable based on technology |
| Tested For Narcotics |
| Amenable based on technology |
| Other Chemical Targets |
| Yes |
| Tested For Biological Agents |
| Yes |
| Other Biological Targets |
| Yes |
| Adaptability |
| Yes; user can add new targets in the field |
| Sample Introduction |
| Liquid |
| Sensitivity/Detection Limits |
| %; ng; µg; ppt |
| False Positive Rates |
| <1% |
| False Negative Rates |
| <1% |
| Start Up Time (From Cold Start To Sample Ready) |
| 1 to 2 hours |
| Response Time (Sample Application To Output) |
| <15 minutes |
| Software Control |
| On-board; PC |
| Other Operational Parameters |
| MRM speed: 500 MRM transitions/s, Mass range m/z 5 to 3000, Scan speed 17000 Da/s |
| Training Required |
| >1 week training |
| Training Available |
| On-site and off-site training available from vendor |
| Manuals Available |
| Operator’s Manual |
| Warranties |
| 1 year factory warranty. 3 year extended warranty and service contract are available at additional cost. Up to 5 year service contracts are also available. |
| Data File Type Format |
| XML, PDF |
