Radius® BZ1
The Radius® BZ1 is an area monitor that can communicate with Ventis® Pro Series personal monitors. The Radius® BZ1 can detect up to seven gases using 15 sensor options including PID. It has an operational time of 7 days (168 hours) of continuous use. Ability to customize alarm action messages such as "EVACUATE" or "VENTILATE". DualSense® Technology uses two sensors to detect the same gas.
Availability: Commercially Available
+1 412 788 4353
1001 Oakdale Road
Oakdale, PA 15071
USA
|
|
www.indsci.com
| Manufacturer |
| Industrial Scientific Corporation |
| Product Name |
| Radius® BZ1 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Photoionization Detection;Electrochemical Detection; |
| Application |
| Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Radius® BZ1 is an area monitor that can communicate with Ventis® Pro Series personal monitors. The Radius® BZ1 can detect up to seven gases using 15 sensor options including PID. It has an operational time of 7 days (168 hours) of continuous use. Ability to customize alarm action messages such as "EVACUATE" or "VENTILATE". DualSense® Technology uses two sensors to detect the same gas. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 29 x 29 x 55 cm (11.5 x 11.5 x 21.5 in) |
| Weight |
| <30 lbs.; 7.5 kg (16.5 lb) |
| Power Requirements |
| NiMH Battery; Rechargeable battery pack |
| Noise Produced |
| 108 dB at 1 m |
| Transportability |
| Person-Portable |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; IP66, Impact-resistant polycarbonate alloys |
| Operating Conditions |
| -20 to 55 °C (-4 to 131 °F), 15 to 95% RH non-condensing (continuous) |
| Consumables |
| None |
| Available Accessories |
| Optional integral pump, up to 30.48 m (100 ft) sample draw |
| Communications Interface |
| Wi-Fi |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Tested For ITF-25 TIC/TIMs |
| VOCs, Ammonia, Carbon monoxide, chlorine, hydrogen, hydrogen sulfide, hydrogen cyanide, nitrogen dioxide, oxygen, sulfur dioxide |
| Sample Introduction |
| Vapor/Gas; |
| Sensitivity/Detection Limits |
| %; ppm; 0 to 2,000 ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| < 5 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Audible and visual |
| Software Control |
| Remote |
| Other Operational Parameters |
| Data logging > 3 months at 10-second intervals. |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| Two-year, including sensors and battery |
