QRAE 3

QRAE 3 is a one- to four-sensor pumped or diffusion gas monitor providing continuous exposure monitoring of oxygen, combustibles, and toxic gases, including hydrogen sulfide, carbon monoxide, sulfur dioxide and hydrogen cyanide for workers and responders in hazardous environments.

Notify me on updates of this product 

Availability: Commercially Available

Tom Kochevar
detectgas@honeywell.com
+1 877 723 2878
3775 North First Street
San Jose, CA 65134
USA
www.honeywellanalytics.com
Manufacturer
Honeywell Analytics
Product Name
QRAE 3
Detection Category
Chemical
Detection Principle
Sensors;
Detection Method
Electrochemical Detection;
Application
Gas Analysis;Forensics;Screening;
Equipment Type
Instrument
Product Synopsis
QRAE 3 is a one- to four-sensor pumped or diffusion gas monitor providing continuous exposure monitoring of oxygen, combustibles, and toxic gases, including hydrogen sulfide, carbon monoxide, sulfur dioxide and hydrogen cyanide for workers and responders in hazardous environments.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
Dimensions
Diffusion: 5.5 x 3.2 x 1.5 in (14 x 8.2 x 4.2 cm) Pumped: 5.7 x 3.2 x 1.7 in (14.5 x 82 x 4.2 cm)
Weight
<1 Lb.; Diffusion: 12.9 oz. (365 g) with battery Pumped: 14.5 oz. (410 g ) with battery and external filter
Power Requirements
Lithium Battery; 14 hours continuous non-wireless, diffusion or 11 hours continuous non- wireless, pumped
Transportability
Handheld
Ruggedness
Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; IP-65/67 case
Operating Conditions
-20 to 50°C (-4 to 122°F), 0 to 95% RH non-condensing
Consumables
<$1,000/year; sensors
Calibration Schedule
Manual, or automatic with AutoRAE 2
Available Accessories
Belt clip
Communications Interface
Wireless
Expected Operational Life
Indefinite
Shelf Life
<1 year
Unit Cost
$1,000.00
Tested For ITF-25 TIC/TIMs
Hydrogen cyanide (HCN), phosphine (PH3), chlorine (Cl2)
Other Chemical Targets
Oxygen (O2), combustibles, and toxic gases, including hydrogen sulfide (H2S), carbon monoxide (CO), sulfur dioxide (SO2), nitrogen dioxide (NO2)
Adaptability
No; cannot detect or add new targets
Sample Introduction
Vapor/Gas;
Sensitivity/Detection Limits
ppm
Start Up Time (From Cold Start To Sample Ready)
Seconds
Response Time (Sample Application To Output)
Continuous (<30 seconds)
Total Run Time
Continuous
Alarm Capability
Man-down alarm; audible, visual and vibration
Software Control
On-board
Other Operational Parameters
Built-in pump or diffusion; can sample through tubing up to 98ft (30m).
Training Required
<1 day training
Training Available
Yes
Manuals Available
Yes
Warranties
Device 2 year LEL, O2, CO, H2S sensors 3 year SO2, HCN sensors 1 year
IATA Shipping Restrictions
Yes; Lithium ion battery
Approved Vendors
Multiple
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: