Tango TX1
The Tango TX1 multigas electrochemical sensor handheld device uses DualSense® Technology using two sensors to detect the same gas. Sensors include CO, CO/H2, H2S, NO2, and SO2.
Availability: Commercially Available
| Manufacturer |
| Industrial Scientific Corporation |
| Product Name |
| Tango TX1 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Emergency Response;Screening; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Tango TX1 multigas electrochemical sensor handheld device uses DualSense® Technology using two sensors to detect the same gas. Sensors include CO, CO/H2, H2S, NO2, and SO2. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 3.9 x 2.0 x 1.4 in (9.9 x 5.1 x 3.5 cm) |
| Weight |
| <1 lb.; 126.0 g (4.4 oz) |
| Power Requirements |
| Lithium Battery; Alkaline Battery; 3.6 V Primary lithium-thionyl chloride (Li-SOCl2); 1.5AH, 2/3AA; replaceable;
non rechargeable; always on; up to 2-year run time depending on operating conditions |
| Noise Produced |
| 110 dB alarm |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; IP66/67.
Case top: Polycarbonate with a protective rubber overmold |
| Operating Conditions |
| -40 to 50 °C (-40 to 122 °F), 15 to 95% RH non-condensing |
| Consumables |
| <$1,000/year; Sensors |
| Suggested Routine Maintenance |
| None |
| Available Accessories |
| Dust barrier kit, water barrier kit, belt clip, nameplates, soft nylon case, docking station |
| Expected Operational Life |
| Indefinite |
| Unit Cost |
| $265.00 |
| Maintenance Cost |
| None |
| Tested For Chemical Agents |
| No |
| Tested For ITF-25 TIC/TIMs |
| No |
| Tested For Explosives |
| No |
| Tested For Narcotics |
| No |
| Other Chemical Targets |
| CO, CO/H2, H2S, NO2, SO2 |
| Adaptability |
| No; cannot detect or add new targets |
| Sample Introduction |
| Vapor/Gas; |
| Sensitivity/Detection Limits |
| ppm; CO, CO/H2 0 to 1,000 ppm in 1 ppm increments. NO2, SO2 0 to 150 ppm in 0.1 ppm increments. H2S 0 to 500 ppm in 0.1 ppm increments. |
| Start Up Time (From Cold Start To Sample Ready) |
| Seconds |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous monitor |
| Alarm Capability |
| Audible, visual and vibrational |
| Software Control |
| On-board |
| Other Operational Parameters |
| Data logging: 3 months at 10-second intervals |
| Training Required |
| <1 day training |
| Manuals Available |
| Yes |
| Warranties |
| Guaranteed for Life™. Warranted for as long as the instrument is supported by Industrial Scientific Corporation (excludes sensors, batteries, and filters). CO and H2S sensors are warranted for three years. All other sensors are warranted for two years. |
