EOS 500
The EOS 500 is a Handheld LIBS Analyzer for Alloy Determination allowing for quick analysis of alloy grade ID and chemistry; especially for light element alloys containing Li, Mg, Al or Si.
Availability: Commercially Available
| Manufacturer |
| Bruker Corporation |
| Product Name |
| EOS 500 |
| Detection Category |
| Chemical; Explosives |
| Detection Principle |
| Elemental Analysis; |
| Detection Method |
| Laser Induced Breakdown Spectroscopy; |
| Application |
| Bulk Analysis; Emergency Response;Forensics;Screening; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The EOS 500 is a Handheld LIBS Analyzer for Alloy Determination allowing for quick analysis of alloy grade ID and chemistry; especially for light element alloys containing Li, Mg, Al or Si. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 10.8 x 12.4 x 3.7 in (275 x 315 x 95 mm) |
| Weight |
| <30 Lbs.; 5.3 Lbs. (2.4 kg) |
| Power Requirements |
| Lithium Battery; 12 hours |
| Noise Produced |
| Negligible |
| Transportability |
| Handheld |
| Operating Conditions |
| 10 to 40°C (50 to 105°F) |
| Consumables |
| None |
| Calibration Schedule |
| Yes; for Al, Ti, Mg alloys; optional Fe, Ni, Cu, Co alloys |
| Suggested Routine Maintenance |
| Cleaning |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $35,000.00 |
| Other Chemical Targets |
| Elemental analysis; Li, Na, Be, Mg, Al, Ti, Fe, Ni, Cu, Co, etc. |
| Number of Library Entries |
| 400+ |
| Adaptability |
| No; cannot detect or add new targets |
| Sample Introduction |
| Solid; |
| Sensitivity/Detection Limits |
| ppm; % |
| Start Up Time (From Cold Start To Sample Ready) |
| < 5 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| < 1 minute |
| Alarm Capability |
| None |
| Software Control |
| On-board |
| Other Operational Parameters |
| Wavelength range: 170 to 720 nm, uses a 1064nm laser. |
| Training Required |
| <1 week training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| Yes |
