X-Series
X-300 to sort out aluminum alloys with low % Mg, is faster and more precise than the other models. X-200 is cheaper and smaller than the X-300. X-100 same as the X-200 for elements titanium and higher. X-50: The PiN diode technology for analyzing basic alloys including stainless, high temps, copper alloys. The X-550 is designed for NDT, PMI users who must access hard-to-reach test locations and welds. The X-550 also features a powerful, miniaturized X-ray tube designed for measuring low atomic number elements Si, P, S, Mg and Al. The X-555 contains LIBS along with XRF, detecting Mg through U.
Availability: Commercially Available
Don Sackett
sales@sciaps.com
+1 339 927 9455
2 Constitution Way
Woburn, MA 01801
|
SciAps Manufacturing & Service
+1 339 927 9455
5452 Aerospace Drive
Laramie, WY 82070
Midwest Region
|
www.sciaps.com
Manufacturer |
| SciAps, Inc. |
Product Name |
| X-Series |
Detection Category |
| Chemical; Explosives |
Detection Principle |
| Elemental Analysis; |
Detection Method |
| X-ray Fluorescence; |
Application |
| Screening;Bulk Analysis; |
Product Model Number |
| X-100, X-200, X-300, X-50, X-505, X-550, X-555 |
Equipment Type |
| Instrument |
Product Synopsis |
| X-300 to sort out aluminum alloys with low % Mg, is faster and more precise than the other models. X-200 is cheaper and smaller than the X-300. X-100 same as the X-200 for elements titanium and higher. X-50: The PiN diode technology for analyzing basic alloys including stainless, high temps, copper alloys. The X-550 is designed for NDT, PMI users who must access hard-to-reach test locations and welds. The X-550 also features a powerful, miniaturized X-ray tube designed for measuring low atomic number elements Si, P, S, Mg and Al. The X-555 contains LIBS along with XRF, detecting Mg through U. |
Availability |
| Commercially Available |
Technology Readiness Level (TRL) |
| 9 |
User Feedback Sources |
| Indifferent/No user feedback |
Dimensions |
| 7.25 x 10.5 x 4.5 in (18 x 27 x 11.4 cm) |
Weight |
| <5 lbs.; 2.3 kg |
Power Requirements |
| Lithium Battery; AC/DC Line Power; On board rechargeable Li-ion battery, rechargeable inside device or with external charger, AC power, hot-swap capability (60s max swap time). |
Transportability |
| Handheld |
Ruggedness |
| Extreme Temperatures/Humidity |
Operating Conditions |
| -12 to 54°C (10 to 130°F) |
Consumables |
| None |
Calibration Schedule |
| Automatic |
Data Analysis Support Equipment |
| SciAps ProfileBuilder PC software |
Communications Interface |
| Wifi, Bluetooth, USB |
Expected Operational Life |
| Indefinite |
Shelf Life |
| >5 years |
Other Chemical Targets |
| Elemental analysis |
Sample Introduction |
| Solid;Liquid; |
Sensitivity/Detection Limits |
| %; ppm |
Start Up Time (From Cold Start To Sample Ready) |
| < 5 minutes |
Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
Software Control |
| PC |
Training Required |
| <1 day training |
Training Available |
| Yes |
Manuals Available |
| Yes |
Warranties |
| Yes |
ITAR/EAR Export Regulations |
| Yes; ITAR regulations may apply |
IATA Shipping Restrictions |
| Yes; Li-ion battery |