Trellchem® Splash 2000P
Discontinued - The TRELLCHEM® Splash 2000P is a powered air respiratory suit ideally suited for use by decontamination personnel in a variety of situations. It is a fully reusable suit which can itself be decontaminated (if required) and easily repaired in the event of damage occurring.
Availability: DISCONTINUED
Dan Thynell
Global Business Development Manager
dan.thynell@ansell.com
+46 1020 51800
Johan Kocksgatan 10
SE-231 81, Trelleborg
Sweden
|
Dana Hammer-Fritzinger
Associate Director, Global Product Management-Body Protection
dana.hammer@ansell.com
+1 800 344 4458
333 George Washington Highway, Unit C
Smithfield, Rhode Island 02917
USA
|
http://protective.ansell.com
| Manufacturer |
| Ansell Protective Solutions AB |
| Product Name |
| Trellchem® Splash 2000P |
| Detection Category |
| Chemical |
| Detection Method |
| PPE/Decon |
| Application |
| Personal Protective Equipment; |
| Equipment Type |
| PPE |
| Product Synopsis |
| Discontinued - The TRELLCHEM® Splash 2000P is a powered air respiratory suit ideally suited for use by decontamination personnel in a variety of situations. It is a fully reusable suit which can itself be decontaminated (if required) and easily repaired in the event of damage occurring. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Supporting Documentation |
| Docs: Splash 2000P_ed13.pdf; Product_Sheet_Trellchem_Splash_2000P_1706_LOW.pdf; |
| Weight |
| <30 lbs.; 11lbs |
| Power Requirements |
| NiMH Battery; for PAPR unit |
| Noise Produced |
| < 75 dB(A) |
| Transportability |
| Person-Portable |
| Operating Conditions |
| -40 to 65 C (-40 to 149 F) |
| Available Accessories |
| Scorpio® #08-354 Gloves, Trellchem® Rubber Cuff, PVC Safety Boots |
| Shelf Life |
| >5 years; when stored unopened in original packaging |
| Unit Cost |
| $980.00 |
| Decontaminable |
| Yes |
| External Material |
| Flexible polyamide fabric, which is single coated with yellow PVC. Encapsulating design with small hump to accommodate the PAPR unit, which is worn inside the suit. The suit is also fitted with an internal collar to help control CO2 levels in the hood area |
| Gloves |
| Scorpio #08-354 (neoprene) rubber gloves as standard. The gloves are attached with the TRELLCHEM® Bayonet glove ring system |
| Seams |
| Double welded seams |
| Zipper |
| 33.5 inches, Watertight PVC zipper placed horizontally on the back, across the shoulders, for easy donning. The zipper is protected by a single splash guard (flap) |
| Lens Finish |
| 1 mm flexible PVC and the visor is welded to the suit. |
| Suit Levels |
| B |
| Live Agent Tested |
| Yes |
| Maximum Suit Weight |
| 11 lbs (with boots) |
| Multi-Layered |
| No |
| Number of Eyepieces |
| 1 |
| Operating Time |
| 6 hours (PAPR unit) |
| Outer Shell Tear Resistant |
| Yes |
| Sizes |
| 7 |
| Standards Met |
| EN 14605, type 3 ”liquid tight”, with powered filtering respiratory protection fulfilling inward leakage requirements of EN 9431:2002, EN 14126 (infective agents), EN 1149-5 (anti-static suit material) |
| Temperature Resistance |
| 65 C |
| Tested By |
| Not supplied |
| Training Required |
| <1 hour training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| Yes |
