JUNO™

The JUNO® hand-held chemical agent detector is capable of detecting, identifying, quantifying and alerting the user to the presence of selected chemical warfare agents and toxic chemical vapors. The JUNO™ will detect at miosis levels.

Notify me on updates of this product 

Availability: Commercially Available: >90 days for delivery

info@chemringds.com
+1 980 235 2200
4205 Westinghouse Commons Drive
Charlotte, NC 28273
USA
www.chemringds.com
Manufacturer
Chemring Detection Systems
Product Name
JUNO™
Detection Category
Chemical; Explosives;
Detection Principle
Spectrometry;
Detection Method
Differential Ion Mobility Spectrometry (DMS);
Application
Emergency Response; Gas Analysis; Screening; Trace Analysis;
Equipment Type
Instrument
Product Synopsis
The JUNO® hand-held chemical agent detector is capable of detecting, identifying, quantifying and alerting the user to the presence of selected chemical warfare agents and toxic chemical vapors. The JUNO™ will detect at miosis levels.
Availability
Commercially Available: >90 days for delivery
Technology Readiness Level (TRL)
9
Market Entry Date
2010
User Feedback Sources
Hands-on Experience
Dimensions
8.4 x 4.0 x 2.2 in (21.4 x 10.2 x 5.6 cm)
Weight
<5 lbs.; 2 lbs (.9 kg)
Power Requirements
Lithium Battery; AC/DC Line Power; Supported batteries: BA-5800A/U, B-2800, Type-5380 External power: 9 to 12 VDC (8 hours)
Transportability
Handheld
Ruggedness
Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; MIL-STD-810
Operating Conditions
–30 to 50°C (–22 to 122°F); 5 to 100% RH (non-condensing)
Consumables
<$1,000/year; Sieve (1,500 to 2,000 hrs)
Calibration Schedule
Annually
Suggested Routine Maintenance
Repacking of the sieves, every 2,000 hours.
Data Analysis Support Equipment
Vehicle or fixed-site installation hardware
Communications Interface
Command control communications, computer interface, and networking capability
Expected Operational Life
10 years
Shelf Life
>5 years
Unit Cost
$11,000.00
Maintenance Cost
Minimal
Tested For Chemical Agents
VX, GA, GB, GD, GF, HD, L, HN3, AC (HCN), CK (CNCI)
Tested For ITF-25 TIC/TIMs
Cl2, H2S, HNO3, HF, SO2, HCI, NH3
Number of Library Entries
Agents and TICs as listed
Adaptability
Yes
Sample Introduction
Vapor/Gas
Sensitivity/Detection Limits
ppm
Known Interferents/Inhibitors
Not affected by common battlefield vapors, but the possibility of false alarms increases as sensitivity is increased. Sensitivity is affected by humidity.
Start Up Time (From Cold Start To Sample Ready)
2 to 3 minutes
Response Time (Sample Application To Output)
Continuous (<30 seconds); 10 to 60 seconds
Total Run Time
< 5 minutes
Alarm Capability
Audible and visual
Software Control
PC, remote
Other Operational Parameters
Two operational parameters: Detector Mode (IDLH) and Monitor Mode (sub-miosis level)
Training Required
<1 day training
Training Available
Yes
Manuals Available
Operator and unit maintenance manual; direct support, and general support maintenance manual
Reachback Service
No
Warranties
Yes
ITAR/EAR Export Regulations
Yes; Subject to EAR parts 730-774
IATA Shipping Restrictions
Yes; U.S. Nuclear Regulatory Agency regulations due to 63Ni source
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: