GDA series
The Gas Detector Array uses a combination of different sensors to detect and identify a very broad range of chemical substances in the range ppm - ppb. The GDA products are comprised of a combination of various sensors: an ion mobility spectrometer (IMS), a photoionization detector (PID), two semiconductor gas sensors (MOS) and an electrochemical cell (EC). There are several available models. The GDA-FR (First response ), GDA-X (explosives), GDA-F (fumigation), GDA-P (personal monitor)
Availability: Commercially Available
Cindy Siggelkow
+49 385 3993 276
Hagenower Straße 73
19061 Schwerin
Germany
|
|
www.airsense.com
| Manufacturer |
| Airsense Analytics |
| Product Name |
| GDA series |
| Detection Category |
| Chemical; Explosives |
| Detection Principle |
| Spectrometry; Sensors; |
| Detection Method |
| Ion Mobility Spectrometry; Electrochemical Detection; Metal Oxide Semiconductor;Photoionization Detection; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Gas Detector Array uses a combination of different sensors to detect and identify a very broad range of chemical substances in the range ppm - ppb. The GDA products are comprised of a combination of various sensors: an ion mobility spectrometer (IMS), a photoionization detector (PID), two semiconductor gas sensors (MOS) and an electrochemical cell (EC). There are several available models. The GDA-FR (First response ), GDA-X (explosives), GDA-F (fumigation), GDA-P (personal monitor) |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 15.7 x 4.5 x 8.4 in (395 x 112 x 210 mm) |
| Weight |
| <30 lbs.; 8.4 lbs (4.2 kg) without batteries |
| Power Requirements |
| AC/DC Line Power; Alkaline Battery; 30W, powered by rechargeable battery and/or power supply |
| Transportability |
| Handheld |
| Ruggedness |
| None |
| Consumables |
| None |
| Suggested Routine Maintenance |
| Minimal |
| Available Accessories |
| WLAN & GPS, Geiger counter (X-ray and gamma detector) |
| Data Analysis Support Equipment |
| Windows XP, Vista, Windows 7, WinMuster GDA |
| Communications Interface |
| Serial port RS-232 |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $55,000.00 |
| Maintenance Cost |
| Minimal |
| Tested For Chemical Agents |
| GA, GB, GD, GF, VX, HD, HN, AC, and L |
| Tested For ITF-25 TIC/TIMs |
| Ammonia, carbon disulfide, chlorine, formaldehyde, hydrogen chloride, hydrogen cyanide, hydrogen fluoride, hydrogen sulfide, phosgene, sulfur dioxide, acrolein, acrylonitrile, carbon monoxide, nitrogen dioxide, phosphine, acetic acid, acetone, benzene, carbon dioxide, chlorobenzene, chloracyane, hydrazine, ethanol, hexane-n-, methanol, styrene, tetrachloroethylene, toluene, toluene diisocyanate, trichloroethane, 1,1,1-, trichloroethane, 1,1,2-, trichloroethylene, and vinyl chloride. Other compounds are listed on the vendor website. |
| Tested For Explosives |
| RDX, PETN, TNT, NG, EGDN, HMTD, TATP |
| Tested For Narcotics |
| Yes |
| Other Chemical Targets |
| Chlorine gas, phosphine or hydrogen cyanide, among others, as well as more complex organic gases like chloropicrin or benzene |
| Adaptability |
| Yes; manufacturer can add new targets to detector |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; ppb |
| Known Interferents/Inhibitors |
| The instrument uses multiple sensors to reduce interferences. |
| Start Up Time (From Cold Start To Sample Ready) |
| < 5 minutes |
| Response Time (Sample Application To Output) |
| <1 minute; 10 seconds to 1 minute |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Audible and Visual |
| Software Control |
| Yes |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| 1 year |
| IATA Shipping Restrictions |
| No |
