Solaris Multigas Detector
The Solaris Multigas Detector is a personal monitor for detection of oxygen, hydrogen sulfide, carbon monoxide and combustible gases. The four in one gas detector displays all gas readings simultaneously.
Availability: DISCONTINUED
| Manufacturer |
| Mine Safety Appliances Company (MSA) |
| Product Name |
| Solaris Multigas Detector |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Catalytic Bead Sensor; Electrochemical Detection; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Solaris Multigas Detector is a personal monitor for detection of oxygen, hydrogen sulfide, carbon monoxide and combustible gases. The four in one gas detector displays all gas readings simultaneously. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Weight |
| <1 lb.; < 8 oz (0.23 kg) |
| Power Requirements |
| Lithium Battery; Alkaline Battery |
| Transportability |
| Pocket Size |
| Operating Conditions |
| 0 to 40°C (32 to 104°F) |
| Consumables |
| <$1,000/year; Batteries; Sensors; Filters |
| Calibration Schedule |
| Daily; more frequently if subjected to physical shock or exposed to silicone, silicates, lead-containing compounds, hydrogen sulfide, or high contaminant levels. |
| Suggested Routine Maintenance |
| Cleaning and periodic checks |
| Available Accessories |
| Powered sampling pump; Sampling probe; Power Supply; Rear Case Assembly; Main PC Board Assembly |
| Communications Interface |
| Galaxy system compatible |
| Expected Operational Life |
| 10 years |
| Shelf Life |
| >5 years |
| Unit Cost |
| $1,417.00 |
| Maintenance Cost |
| Minimal |
| Tested For Chemical Agents |
| No |
| Tested For ITF-25 TIC/TIMs |
| Combustible gases |
| Tested For Explosives |
| No |
| Tested For Narcotics |
| No |
| Other Chemical Targets |
| Carbon monoxide, hydrogen sulfide, oxygen |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; LEL |
| Known Interferents/Inhibitors |
| Some gases may reduce the sensitivity of the combustible gas sensor by polymerizing on the catalytic surface. |
| Start Up Time (From Cold Start To Sample Ready) |
| 2 minutes |
| Response Time (Sample Application To Output) |
| <1 minute |
| Total Run Time |
| < 5 minutes |
| Alarm Capability |
| Audible, visual and vibration |
| Other Operational Parameters |
| None |
| Training Required |
| <1 hour training |
| Training Available |
| Yes |
| Manuals Available |
| User's Manual |
| Reachback Service |
| No |
| Warranties |
| 2 years |
