AMP Radiation Monitoring System Series

Offered in a wide range of measurement ranges, the AMP series of area radiation monitors provide real-time remote radiological measurement. Featuring waterproof probes and available cables anywhere from 25 to 350 feet in length, they can safely measure in areas where high radiation could otherwise compromise meter electronics. Model types are based on their linear response. AMP 50: 10 uR/hr to 4 R/hr. AMP 100: 0.5 to 1000 mR/hr. AMP 200: 5 to 10,000 R/hr.

Notify me on updates of this product 

Availability: Commercially available

Carol McGowan
Homeland Security and Defense Sales Manager
cmcgowan@mirion.com
+1 770 329 3228
5000 Highlands Parkway, Suite 150
Smyrna, GA 30082
USA
+1 770 432 2744
www.mirion.com
Manufacturer
Mirion Technologies
Product Name
AMP Radiation Monitoring System Series
Detection Category
Radiological/Nuclear
Detection Principle
Geiger-Muller Detectors;
Detection Method
Geiger-Muller Detectors;
Application
Identifiers; Survey Meter;
Product Model Number
AMP 50, AMP 100, AMP 200
Equipment Type
Instrument
Product Synopsis
Offered in a wide range of measurement ranges, the AMP series of area radiation monitors provide real-time remote radiological measurement. Featuring waterproof probes and available cables anywhere from 25 to 350 feet in length, they can safely measure in areas where high radiation could otherwise compromise meter electronics. Model types are based on their linear response. AMP 50: 10 uR/hr to 4 R/hr. AMP 100: 0.5 to 1000 mR/hr. AMP 200: 5 to 10,000 R/hr.
Availability
Commercially available
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
Dimensions
2.7 x 4.7 x 0.5 in (6.9 x 12 x 1 cm)
Weight
<1 lb.; 7.9 oz (0.22 kg)
Power Requirements
Alkaline Battery; 9v battery
Transportability
Handheld
Ruggedness
Waterproof/Resistant; waterproof detector housing and cable
Operating Conditions
-10 to 50°C (15 to 120° F )
Consumables
None
Communications Interface
Built in communication port for use with WRM2 EXT transmitter
Shelf Life
>5 years
Radiological Targets
Gamma
Sample Introduction
Radioactive Particle
Sensitivity/Detection Limits
cps; 330 CPS
Start Up Time (From Cold Start To Sample Ready)
< 2 minutes
Response Time (Sample Application To Output)
Continuous (<30 seconds)
Total Run Time
Continuous
Alarm Capability
Yes
Training Required
<1 week training
Training Available
Yes
Manuals Available
Yes
Reachback Service
No
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: