600 FTIR
The California Analytical Instruments 600 FTIR Analyzer provides continuous and stable analysis of virtually any gas that has an infrared absorption spectrum. The proprietary heated sample cell enables the instrument to accommodate hot samples containing high levels of moisture. The SC model includes a short cell for higher concentration levels.
Availability: Commercially Available
| Manufacturer |
| ENVEA |
| Product Name |
| 600 FTIR |
| Detection Category |
| Chemical; Explosives |
| Detection Principle |
| Molecular Spectroscopy; |
| Detection Method |
| Mid-infrared Spectroscopy; |
| Application |
| Gas Analysis; |
| Product Model Number |
| 600, 600SC |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The California Analytical Instruments 600 FTIR Analyzer provides continuous and stable analysis of virtually any gas that has an infrared absorption spectrum. The proprietary heated sample cell enables the instrument to accommodate hot samples containing high levels of moisture. The SC model includes a short cell for higher concentration levels. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 7.0 x 19 x 24 in (18 x 48 x 61 cm) |
| Weight |
| >50 lbs.; 65 to 70 lbs (29 to 32 kg) |
| Power Requirements |
| AC/DC Line Power; 115 VAC/60Hz or 230 VAC/50Hz |
| Transportability |
| Benchtop/Fixed; Small Footprint |
| Operating Conditions |
| 5 to 40°C (41 to 105°F); < 80% RH (non-condensing) |
| Consumables |
| None |
| Available Accessories |
| Pressure compensation; Analog output module; Intelligent multi-point sampler; Sample accessories |
| Data Analysis Support Equipment |
| Rack-mount PC or laptop-controlled , OPUS software for Windows XP or higher. |
| Communications Interface |
| RS-232 |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Maintenance Cost |
| Minimal |
| Tested For Chemical Agents |
| Yes |
| Tested For Explosives |
| Yes |
| Other Chemical Targets |
| IR active gases |
| Adaptability |
| Yes; manufacturer can add new targets to detector |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppb |
| Start Up Time (From Cold Start To Sample Ready) |
| 20 seconds to 5 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); Seconds |
| Total Run Time |
| Continuous |
| Software Control |
| PC |
| Other Operational Parameters |
| It does not require liquid nitrogen. |
| Training Required |
| <1 week training |
| Training Available |
| Yes |
| Manuals Available |
| Operator's manual |
| Warranties |
| 1 to 4 years |
| IATA Shipping Restrictions |
| No |
