S1 Titan LE/SP
The S1 TITAN a tube-based handheld XRF analyzer. Features include a touch-screen color display, 50 kV X-ray tube, SMART grade timing, sharp beam optimized X-ray geometry, and a housing that is sealed against humid and dusty environments. The S1 TITAN series is available in two configurations LE and SP. The LE has a SDD detector (Model 500, 600 and 800) and the SP is a SiPIN detector (Model 200, 300).
Availability: Commercially available
| Manufacturer |
| Bruker Corporation |
| Product Name |
| S1 Titan LE/SP |
| Detection Category |
| Chemical; Explosives |
| Detection Principle |
| Elemental Analysis; |
| Detection Method |
| X-ray Fluorescence ; |
| Application |
| Emergency Response; Screening; Bulk Analysis; |
| Product Model Number |
| Models 200, 300, 500, 600, 800 |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The S1 TITAN a tube-based handheld XRF analyzer. Features include a touch-screen color display, 50 kV X-ray tube, SMART grade timing, sharp beam optimized X-ray geometry, and a housing that is sealed against humid and dusty environments. The S1 TITAN series is available in two configurations LE and SP. The LE has a SDD detector (Model 500, 600 and 800) and the SP is a SiPIN detector (Model 200, 300). |
| Availability |
| Commercially available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 10 x 11 x 3.7 in (254 x 280 x 94 mm) |
| Weight |
| <5 Lbs.; 3.2 Lbs. (1.5 kg) |
| Power Requirements |
| Lithium Battery; AC/DC Line Power; 7.2V Li-Ion rechargeable, 9V AC adaptor |
| Noise Produced |
| Negligible |
| Transportability |
| Handheld |
| Operating Conditions |
| –10 to 50°C (14 to 122°F) |
| Consumables |
| None |
| Available Accessories |
| Battery Charger |
| Communications Interface |
| USB |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $50,000.00 |
| Other Chemical Targets |
| Elemental analysis |
| Adaptability |
| No; cannot detect or add new targets |
| Sample Introduction |
| Solid |
| Start Up Time (From Cold Start To Sample Ready) |
| 15 minutes |
| Response Time (Sample Application To Output) |
| <5 minutes; 2 minutes |
| Total Run Time |
| < 20 minutes |
| Alarm Capability |
| No |
| Software Control |
| On-board |
| Other Operational Parameters |
| Elemental Range: LE: Mg-U; SP: Ca-U; Max Sample Temperature: LE:150°C; SP: 500°C; Spot Size: LE: 3,5, or 8mm; SP: 5mm |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
