RAID-M100Plus

The RAID-M100Plus is a hand held, multirole IMS Chemical Agent Detector that can identify Chemical Warfare Agents (CWA) and Toxic Industrial Chemicals (TIC) at low levels. Two versions of RAID-M are offered. The RAID-M100 uses a low-level 63Ni source, whereas the RAID-MNR uses a non-radioactive high energy photoionisation (HEPI) source.

Notify me on updates of this product 

Availability: Commercially Available

Frank Thibodeau
Vice President of Business Development
frank.thibodeau@brukerdetection.us
+1 978 663 3663
43 Manning Road
Billerica, MA 01824
USA
www.bruker.com
Manufacturer
Bruker Corporation
Product Name
RAID-M100Plus
Detection Category
Chemical; Explosives
Detection Principle
Spectrometry;
Detection Method
Ion Mobility Spectrometry;
Application
Emergency Response; Gas Analysis; Screening; Trace Analysis;
Equipment Type
Instrument
Product Synopsis
The RAID-M100Plus is a hand held, multirole IMS Chemical Agent Detector that can identify Chemical Warfare Agents (CWA) and Toxic Industrial Chemicals (TIC) at low levels. Two versions of RAID-M are offered. The RAID-M100 uses a low-level 63Ni source, whereas the RAID-MNR uses a non-radioactive high energy photoionisation (HEPI) source.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
Dimensions
15.7 x 4.5 x 6.5 in (40 x 11.4 x 16.5 cm)
Weight
<30 Lbs.; 7.5 Lbs. with batteries (3.4 kg)
Power Requirements
Lithium Battery; Rechargeable
Noise Produced
Negligible
Transportability
Handheld
Ruggedness
Waterproof/Resistant; Extreme Temperatures/Humidity
Operating Conditions
–30 to 50°C (-22 to 122°F)
Consumables
<$1,000/year; Dust, purge, and drying filters, dopant. Filters are rated for 500 operating hours
Suggested Routine Maintenance
Filter and dopant replacement every 500 hours
Data Analysis Support Equipment
Accessories include: Vehicle mounting, remote control, software monitoring, XIMS NT software, filters, dopant, rechargeable spare batteries, com unit, surface sampler, and RS-232 to USB converter
Communications Interface
Interface for connecting to computer networks.
Expected Operational Life
1 to 2 years
Shelf Life
<5 years; 1 to 2 years
Unit Cost
$17,000.00
Maintenance Cost
$600 to $1,500 per year in consumable costs.
Tested For Chemical Agents
GB, VX, GA, GD, GF, AC, CG, HD, L, HN, CL2
Tested For ITF-25 TIC/TIMs
Chlorine, HCN, HCl, SO2, arsine
Tested For Explosives
No
Tested For Narcotics
No
Other Chemical Targets
Riot control agents, toluene 2,4-diisocyanate, toluene 2,6-diisocyanate
Adaptability
Yes, user can add new targets to detector with support using optional RAID-NT control software
Sample Introduction
Vapor/Gas
Sensitivity/Detection Limits
ppm; ppb
Known Interferents/Inhibitors
Typical interferents for IMS detector, including JP-8, gasoline, floor wax, window cleaner
Start Up Time (From Cold Start To Sample Ready)
1 to 5 minutes
Response Time (Sample Application To Output)
<1 minute
Alarm Capability
Audible and visual
Software Control
XIMS-NT software
Other Operational Parameters
Automatic purge mode to prevent saturation and achieve fast recovery time.
Training Required
<1 day training
Training Available
Self-training. Instructor training available for additional cost.
Manuals Available
Operator’s manual
Warranties
1 year factory warranty. Extended warranties at 5% per year up to 5 years.
ITAR/EAR Export Regulations
Yes; U.S. Nuclear Regulatory Agency regulations due to 63Ni source. Source activity is 100 MBq (2.7 mCi).
IATA Shipping Restrictions
Yes; U.S. Nuclear Regulatory Agency regulations due to 63Ni source. Source activity is 100 MBq (2.7 mCi).
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: