FP-30
The FP-30 is a handheld gas monitor for the detection of formaldehyde using photoelectric photometry with colorimetric detection (dinitrophyenylhydrazine method). The sample drawing rate is controlled by a microprocessor, and the unit has a direct readout of measurement value on an LCD display. The FP-30 can detect the new World Health Organization level of 0.08 ppm average for 30 minutes. Up to 100 readings can be stored in internal memory.
Availability: Commercially Available
| Manufacturer |
| RKI Instruments |
| Product Name |
| FP-30 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Emergency Response; Gas Analysis; |
| Product Model Number |
| FP-30 |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The FP-30 is a handheld gas monitor for the detection of formaldehyde using photoelectric photometry with colorimetric detection (dinitrophyenylhydrazine method). The sample drawing rate is controlled by a microprocessor, and the unit has a direct readout of measurement value on an LCD display. The FP-30 can detect the new World Health Organization level of 0.08 ppm average for 30 minutes. Up to 100 readings can be stored in internal memory. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| Market Entry Date |
| Replaces FP-40 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 3.4 x 7.5 x 1.6 in. (8.5 x 19 x 4 cm) |
| Weight |
| <5 lbs.; 17.6 oz (500 g) |
| Power Requirements |
| Alkaline Battery; Four AA alkaline batteries (12 hours) |
| Transportability |
| Handheld |
| Ruggedness |
| Waterproof/Resistant; Dust; Vibration/Shock; Not intrinsically safe. |
| Operating Conditions |
| -10 to 40°C (14 to 104° F); < 90% RH |
| Consumables |
| <$1,000/year; Detection tabs (sold in packs of 20) |
| Calibration Schedule |
| No calibration required |
| Suggested Routine Maintenance |
| Replace sampling pump (annually) |
| Available Accessories |
| Carrying case |
| Data Analysis Support Equipment |
| Optional software for data logger |
| Expected Operational Life |
| Sample pump has an expected life of 1 year (field replaceable); sensor life is 5 years (factory replaceable only). |
| Shelf Life |
| <1 year; Detection tabs have a shelf life of 1 year and must be stored under refigeration (37-50° F, 3-10° C) |
| Unit Cost |
| $1,050.00 |
| Other Chemical Targets |
| Formaldehyde |
| Number of Library Entries |
| 1 |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; 0 to 0.4 ppm (30 minute sampling time), 0 to 1.0 ppm (15 minute sampling time) |
| Response Time (Sample Application To Output) |
| >15 minutes; 15 to 30 minutes |
| Total Run Time |
| 15 to 30 minutes |
| Alarm Capability |
| No |
| Software Control |
| No external control |
| Training Required |
| <1 day training |
| Training Available |
| No |
| Manuals Available |
| Yes |
| Warranties |
| 1 year material and workmanship |
| Approved Vendors |
| Multiple |
| Data File Type Format |
| Proprietary |
