Eagle 1
The EAGLE 1 is a handheld 6-gas portable monitor for detection of LEL, O2, H2S and CO, and other toxic gases. The EAGLE features include single-button selection of PPM or LEL hydrocarbon , infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges, a methane elimination switch for environmental applications, a long list of super toxic gases and measurable ranges, and dual hydrophobic filters that increases its water resistant performance.
Availability: Commercially Available
| Manufacturer |
| RKI Instruments |
| Product Name |
| Eagle 1 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Emergency Response; Gas Analysis; |
| Product Model Number |
| Eagle 1 |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The EAGLE 1 is a handheld 6-gas portable monitor for detection of LEL, O2, H2S and CO, and other toxic gases. The EAGLE features include single-button selection of PPM or LEL hydrocarbon , infrared sensors for CO2, methane or hydrocarbons in LEL and % volume ranges, a methane elimination switch for environmental applications, a long list of super toxic gases and measurable ranges, and dual hydrophobic filters that increases its water resistant performance. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 10.5 x 5.9 x 7 in (27 x 15 x 18 cm) |
| Weight |
| <5 lbs.; 2.3 kg |
| Power Requirements |
| Alkaline Battery; NiMH Battery; Four Size D alkaline or Ni-Cad batteries; 30 hours of continuous operation on D batteries, 18 hours on -iCad |
| Noise Produced |
| 85 dB alarm |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; IP-67 approval. Intrinsically Safe, Class I, Division 1, Groups A, B, C and D. CSA / NRTL & UL Classified (most versions). |
| Operating Conditions |
| -20 to 50°C (-4 to 122°F), 0 to 95% RH, non-condensing |
| Consumables |
| <$1,000/year; Calibration gases, filters, sensors |
| Calibration Schedule |
| Depends on use; weekly or monthly under normal use. |
| Suggested Routine Maintenance |
| Change batteries, sensors, and H2S filters as needed. See vendor website for frequency of replacement. |
| Available Accessories |
| Data logging up to 4 gases (no datalogging on 5 or 6 gas versions); remote alarm; dilution fitting (50/50), extension probes, battery charger, Ni-Cad batteries. |
| Data Analysis Support Equipment |
| Data logging capability is optional. Requires Eagle Data Downloader Kit. |
| Expected Operational Life |
| 10 years |
| Shelf Life |
| >5 years |
| Unit Cost |
| $2,250.00 |
| Maintenance Cost |
| $1,000/year (est.) for replacement sensors and calibration gases |
| Other Chemical Targets |
| Confined space gases: CH4, hydrocarbons, O2, CO, H2S
Super Toxics and Other Gases: NH3, AsH3, CL2, CLO2, FL2, HF, HCL, HCN, H2Se, H2S, NO2, O3, NO, PH3, SiH4, SO2
IR Sensors: CO2, CH4, isobutane |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| % |
| Start Up Time (From Cold Start To Sample Ready) |
| Immediate |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous |
| Training Required |
| <1 day training |
| Training Available |
| No |
| Manuals Available |
| Yes |
