FLEXMAP 3D®
Multiplex fluorescent assay detection with flow cytometry. The FLEXMAP 3D® is Luminex’s most advanced and versatile multiplexing platform. Fast read time, compatibility with both 96- and 384-well plates, and ease of integration with front-end automation systems make the FLEXMAP 3D the platform of choice for high throughput applications. The platform uses both magnetic and non-magnetic microspheres and is capable of simultaneously measuring up to 500 genes or proteins from a small sample. Automated start up, shut down, and maintenance routines make the FLEXMAP 3D easy to use and maintain.
Availability: Commercially Available
| Manufacturer |
| Luminex Corporation |
| Product Name |
| FLEXMAP 3D® |
| Detection Category |
| Biological |
| Detection Principle |
| Immunological; |
| Detection Method |
| Flow Cytometry; Fluorescence; |
| Application |
| Laboratory Analysis; Detection; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| Multiplex fluorescent assay detection with flow cytometry. The FLEXMAP 3D® is Luminex’s most advanced and versatile multiplexing platform. Fast read time, compatibility with both 96- and 384-well plates, and ease of integration with front-end automation systems make the FLEXMAP 3D the platform of choice for high throughput applications. The platform uses both magnetic and non-magnetic microspheres and is capable of simultaneously measuring up to 500 genes or proteins from a small sample. Automated start up, shut down, and maintenance routines make the FLEXMAP 3D easy to use and maintain. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| Market Entry Date |
| 2009 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 23 x 25.7 x 18 in (58.4 x63.5 x 54.7 cm) |
| Weight |
| >50 lbs.; 170 lb (78.1 kg) |
| Power Requirements |
| AC/DC Line Power; 100 to 120 V and 200 to240 V |
| Noise Produced |
| <85 dBA |
| Transportability |
| Benchtop/Fixed |
| Operating Conditions |
| 15 to 30°C (59 to 86°F); 20 to 80%RH, noncondensing; Altitude: < 2400 m (7874 ft.) above mean sea level |
| Consumables |
| >$1,000/year; 96 and 384 well plates (compatible with heat block), calibration and verification kits, xMAP Sheath Fluid |
| Solvents/Reagents |
| Liquids |
| Calibration Schedule |
| Weekly |
| Suggested Routine Maintenance |
| Fluid maintenance, perform weekly maintenance routine, remove clogs, clean the sample probe, and calibrate the system weekly, clean surfaces monthly, replace and clean air filters and syrinige seal semi-annualy, replace the sheath filter annualy. Replace fuses as necessary. If putting or removing to long term storage run "Preparation for storage" routine |
| Available Accessories |
| IQ/OQ and Yearly OQ Services; Barcode Reader; Software add-ons: 21 CFR Part 11, Automation, LIS modules |
| Data Analysis Support Equipment |
| Printer, UPS (1050 watts for 45 min) |
| Communications Interface |
| USB |
| Unit Cost |
| $130,000.00 |
| Other Biological Targets |
| Other biological target assays are available from Luminex and Partners |
| Adaptability |
| Yes |
| Sample Introduction |
| Liquid |
| False Positive Rates |
| <4% with < 1.5% crossover |
| False Negative Rates |
| < 4% with <1.5% crossover |
| Start Up Time (From Cold Start To Sample Ready) |
| 45 minutes |
| Response Time (Sample Application To Output) |
| >15 minutes; 20 minutes per 96 well plate |
| Total Run Time |
| 20 min/96 well plate, 80 min/384 well plate |
| Alarm Capability |
| Audible |
| Software Control |
| PC |
| Training Required |
| <1 week training |
| Training Available |
| online, live online, classroom |
| Manuals Available |
| Yes |
| Warranties |
| 1 year |
| ITAR/EAR Export Regulations |
| No |
| IATA Shipping Restrictions |
| No |
| Data File Type Format |
| xPONENT(R) Software; .csv |
