Pro2030
The Pro2030 is a handheld dissolved oxygen meter that automatically compensates for changes in salinity values. It measures DO, salinity, conductivity, specific conductance, TDS, barometric pressure and temperature.
Availability: Commercially Available
| Manufacturer |
| YSI, Inc. |
| Product Name |
| Pro2030 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Sensors |
| Application |
| Water Quality; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| The Pro2030 is a handheld dissolved oxygen meter that automatically compensates for changes in salinity values. It measures DO, salinity, conductivity, specific conductance, TDS, barometric pressure and temperature. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 8.5 x 3.3 x 2.2 in (21.6 x 8.3 x 5.6 cm) |
| Weight |
| <5 lbs.; 1.05 lbs (475 g ) |
| Power Requirements |
| Alkaline Battery; 2 alkaline C-cells |
| Transportability |
| Pocket Size |
| Ruggedness |
| Waterproof/Resistant; Dust; IP67, 1 meter drop test |
| Operating Conditions |
| -5 to 70°C (long term storage temperature) |
| Consumables |
| >$1,000/year; DO cap membrane kit, DO sensors, conductivity cable, calibration solution, batteries |
| Calibration Schedule |
| Yes |
| Suggested Routine Maintenance |
| Membrane replacement, DO sensor and cable replacement, possible gasket and o-ring replacement |
| Unit Cost |
| $1,600.00 |
| Maintenance Cost |
| Membrane $56, Sensors $170 |
| Other Chemical Targets |
| Measure dissolved oxygen |
| Sample Introduction |
| Liquid |
| Sensitivity/Detection Limits |
| ppt; %; mg; 0 to 500% air saturation, 0 to 50 mg/L dissolved oxygen |
| Start Up Time (From Cold Start To Sample Ready) |
| Allow 5-15 minutes for warm up for polarographic sensor |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); 8 seconds with standard membrane |
| Other Operational Parameters |
| 0 to 200 mS/cm (auto range), conductivity 0 to 70 ppt, salinity 0 to 100 g/L total dissolved solvents |
| Training Required |
| <1 day training |
| Manuals Available |
| Yes |
| Warranties |
| 3 year instrument, 2 year cable, 1 year polarographic sensors, 6 month galvanic sensors |
