Infrared Sensors
The infrared sensors offer reliable measurements of Carbon Dioxide, Carbon Monoxide or Methane.
Availability: Commercially Available
| Manufacturer |
| Servomex Group Limited |
| Product Name |
| Infrared Sensors |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Non-Dispersive Infrared (NDIR); |
| Application |
| Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| The infrared sensors offer reliable measurements of Carbon Dioxide, Carbon Monoxide or Methane. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| Ir1520: 3.9 x 5 x 2.1 in (100 x 127.5 x 52.5 mm) Ir3107: 1.4 x 2.2 x .88 in (35 x 56 x 22.3 mm) |
| Weight |
| <5 lbs.; 2.5 -16.9 oz (70-480g) |
| Power Requirements |
| AC/DC Line Power; Dependent on sensor, 2.2A at startup, 0.5A after startup |
| Transportability |
| Pocket Size |
| Ruggedness |
| Vibration/Shock; Meets requirements of BS EN 60068-2-6:1996 (IEC 68-2-
6), BS EN 60068-2-27:1993 (IEC 68-2-27), IEC 68-2-34,
BS EN 150 80601-2-12_2011, ISO 80601-2-55 |
| Operating Conditions |
| 5 to 50°C humidity 0-90% |
| Other Chemical Targets |
| Carbon monoxide, Carbon dioxide, Methane |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| 15 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); CO2 – less than 100msecs – 4 sec (depending on model) CO – 4 sec CH4 – 4 sec |
| Alarm Capability |
| Signal output |
| Other Operational Parameters |
| Analogue and digital signal outputs |
| Training Required |
| <1 week training |
| Manuals Available |
| Specification sheets |
