SenseAir S8
SenseAir® S8 is a safety switch that can be used in control and alarm applications. The sensor can be integrated in a wide range of different alarm applications where you want to detect CO2, such as leakage detection.
Availability: Commercially Available
| Manufacturer |
| SenseAir |
| Product Name |
| SenseAir S8 |
| Detection Category |
| Chemical |
| Detection Principle |
| Molecular Spectroscopy; |
| Detection Method |
| Non-Dispersive Infrared (NDIR); |
| Application |
| Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| SenseAir® S8 is a safety switch that can be used in control and alarm applications. The sensor can be integrated in a wide range of different alarm applications where you want to detect CO2, such as leakage detection. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 1.32 x 0.79 x 0.33 in (33.5 x 20 x 8.5 mm) |
| Weight |
| <1 lb.; <.3 oz (8 g) |
| Power Requirements |
| AC/DC Line Power; 4.50-5.25 V, Consumption 300 mA peak, 30 mA average |
| Transportability |
| Pocket Size |
| Operating Conditions |
| 0 to 50?C (operating temperature) 0 – 85% Relative Humidity, non-condensing |
| Calibration Schedule |
| Can be performed but should not be necessary |
| Suggested Routine Maintenance |
| Maintenance free under normal operating conditions |
| Communications Interface |
| UART, Modbus Protocol |
| Shelf Life |
| >5 years |
| Unit Cost |
| $18.00 |
| Maintenance Cost |
| Maintenance Free under normal operating conditions |
| Other Chemical Targets |
| Measures CO2 |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Response Time (Sample Application To Output) |
| <5 minutes; 2 minutes by 90% |
| Alarm Capability |
| Yes |
| Training Required |
| <1 week training; Programming Experience |
| Training Available |
| Sample code can be provided |
| Manuals Available |
| Yes |
| Warranties |
| 2 years |
