Inspector Series (300, 500)
The Inspector series of Raman analyzers are designed for in-field operation. They feature an ergonomically designed shape and a comfortable hand-strap. They are rugged, field hardened and wide-ranging. The Inspector 300 and 500 are very similar, but have differing lasers and detectors. The 300 model is marketed for speed and range of compounds. The 500 model specializes in the analysis of highly fluorescent samples.
Availability: DISCONTINUED
Don Sackett
sales@sciaps.com
+1 339 927 9455
2 Constitution Way
Woburn, MA 01801
|
SciAps Manufacturing & Service
+1 339 927 9455
5452 Aerospace Drive
Laramie, WY 82070
|
www.sciaps.com
| Manufacturer |
| SciAps, Inc. |
| Product Name |
| Inspector Series (300, 500) |
| Detection Category |
| Chemical; Explosives |
| Detection Principle |
| Molecular Spectroscopy; |
| Detection Method |
| Raman Spectroscopy; |
| Application |
| Emergency Response; Screening; Bulk Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Inspector series of Raman analyzers are designed for in-field operation. They feature an ergonomically designed shape and a comfortable hand-strap. They are rugged, field hardened and wide-ranging. The Inspector 300 and 500 are very similar, but have differing lasers and detectors. The 300 model is marketed for speed and range of compounds. The 500 model specializes in the analysis of highly fluorescent samples. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 7.5 x 6.9 x 1.7 in (19 x 17.6 x 4.4 cm) |
| Weight |
| <5 lbs.; 3.75 lbs (1.7 kg) |
| Power Requirements |
| Lithium Battery; 4 hour |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; MIL SPEC 810G, IP67 |
| Operating Conditions |
| -20 to 40°C (-4 to 105°F) |
| Consumables |
| <$1,000/year; Desiccants and vials |
| Calibration Schedule |
| Can perform a self-test at regular intervals which are typically performed once a month |
| Suggested Routine Maintenance |
| Replace desiccants every 3 months |
| Available Accessories |
| Point-and-shoot adapter allowing for analysis of thick or double-bagged samples, or sample bottles, Right-Angle Adapter, Barcode Data Entry. |
| Data Analysis Support Equipment |
| NuSpec or NuSpec Pro software |
| Communications Interface |
| Wi-Fi, USB, Bluetooth |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $28,000.00 |
| Maintenance Cost |
| Additional libraries: $1,000 to $2,000 |
| Tested For Chemical Agents |
| Yes |
| Tested For ITF-25 TIC/TIMs |
| Yes |
| Tested For Explosives |
| Yes |
| Tested For Narcotics |
| Yes; fentanyl, carfentanil, sufentanil, alfentanil, remifentanil, heroin, ketamine, lorazepam, 3-quinuclidinyl benzilate, U-47700 |
| Number of Library Entries |
| CWC (Chemical Warfare Agents, TICS, TIMS), Law Enforcement (Narcotics, Explosives), Chemical Library, Pharmaceutical, Plastics |
| Adaptability |
| Yes; user can add new targets in the field |
| Sample Introduction |
| Liquid; Solid |
| Sensitivity/Detection Limits |
| Bulk; mg; g; % |
| Known Interferents/Inhibitors |
| Fluorescence |
| Start Up Time (From Cold Start To Sample Ready) |
| 10 seconds |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| 15 to 30 seconds |
| Software Control |
| On-board |
| Other Operational Parameters |
| Excitation Wavelength: 1030 nm (500 model), 785 nm (300 model) Laser: 300 mW 1030 nm, Class III B.
Spectral Range: 150 - 2450 cm-1 |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Reachback Service |
| No |
| Warranties |
| 1 year |
| ITAR/EAR Export Regulations |
| Yes; ITAR regulations may apply |
| IATA Shipping Restrictions |
| Yes; Lithium ion battery |
