Inspector Series (300, 500)

The Inspector series of Raman analyzers are designed for in-field operation. They feature an ergonomically designed shape and a comfortable hand-strap. They are rugged, field hardened and wide-ranging. The Inspector 300 and 500 are very similar, but have differing lasers and detectors. The 300 model is marketed for speed and range of compounds. The 500 model specializes in the analysis of highly fluorescent samples.

Notify me on updates of this product 

Availability: DISCONTINUED

Don Sackett
sales@sciaps.com
+1 339 927 9455
2 Constitution Way
Woburn, MA 01801
SciAps Manufacturing & Service
+1 339 927 9455
5452 Aerospace Drive
Laramie, WY 82070
www.sciaps.com
Manufacturer
SciAps, Inc.
Product Name
Inspector Series (300, 500)
Detection Category
Chemical; Explosives
Detection Principle
Molecular Spectroscopy;
Detection Method
Raman Spectroscopy;
Application
Emergency Response; Screening; Bulk Analysis;
Equipment Type
Instrument
Product Synopsis
The Inspector series of Raman analyzers are designed for in-field operation. They feature an ergonomically designed shape and a comfortable hand-strap. They are rugged, field hardened and wide-ranging. The Inspector 300 and 500 are very similar, but have differing lasers and detectors. The 300 model is marketed for speed and range of compounds. The 500 model specializes in the analysis of highly fluorescent samples.
Availability
DISCONTINUED
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
Dimensions
7.5 x 6.9 x 1.7 in (19 x 17.6 x 4.4 cm)
Weight
<5 lbs.; 3.75 lbs (1.7 kg)
Power Requirements
Lithium Battery; 4 hour
Transportability
Handheld
Ruggedness
Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; MIL SPEC 810G, IP67
Operating Conditions
-20 to 40°C (-4 to 105°F)
Consumables
<$1,000/year; Desiccants and vials
Calibration Schedule
Can perform a self-test at regular intervals which are typically performed once a month
Suggested Routine Maintenance
Replace desiccants every 3 months
Available Accessories
Point-and-shoot adapter allowing for analysis of thick or double-bagged samples, or sample bottles, Right-Angle Adapter, Barcode Data Entry.
Data Analysis Support Equipment
NuSpec or NuSpec Pro software
Communications Interface
Wi-Fi, USB, Bluetooth
Expected Operational Life
Indefinite
Shelf Life
>5 years
Unit Cost
$28,000.00
Maintenance Cost
Additional libraries: $1,000 to $2,000
Tested For Chemical Agents
Yes
Tested For ITF-25 TIC/TIMs
Yes
Tested For Explosives
Yes
Tested For Narcotics
Yes; fentanyl, carfentanil, sufentanil, alfentanil, remifentanil, heroin, ketamine, lorazepam, 3-quinuclidinyl benzilate, U-47700
Number of Library Entries
CWC (Chemical Warfare Agents, TICS, TIMS), Law Enforcement (Narcotics, Explosives), Chemical Library, Pharmaceutical, Plastics
Adaptability
Yes; user can add new targets in the field
Sample Introduction
Liquid; Solid
Sensitivity/Detection Limits
Bulk; mg; g; %
Known Interferents/Inhibitors
Fluorescence
Start Up Time (From Cold Start To Sample Ready)
10 seconds
Response Time (Sample Application To Output)
Continuous (<30 seconds)
Total Run Time
15 to 30 seconds
Software Control
On-board
Other Operational Parameters
Excitation Wavelength: 1030 nm (500 model), 785 nm (300 model) Laser: 300 mW 1030 nm, Class III B. Spectral Range: 150 - 2450 cm-1
Training Required
<1 day training
Training Available
Yes
Manuals Available
Yes
Reachback Service
No
Warranties
1 year
ITAR/EAR Export Regulations
Yes; ITAR regulations may apply
IATA Shipping Restrictions
Yes; Lithium ion battery
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: