UltraRAE 3000+
The UltraRAE 3000+ is a handheld compound-specific monitor. Its Photoionization Detector’s (PID) extended range is 0.05 to 10,000 ppm in VOC mode and 50 to 200 ppm in benzene-specific mode.
Availability: Commercially Available
| Manufacturer |
| Honeywell Analytics |
| Product Name |
| UltraRAE 3000+ |
| Detection Category |
| Chemical; |
| Detection Principle |
| Sensors; |
| Detection Method |
| Photoionization Detection; |
| Application |
| Gas Analysis; Emergency Response; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The UltraRAE 3000+ is a handheld compound-specific monitor. Its Photoionization Detector’s (PID) extended range is 0.05 to 10,000 ppm in VOC mode and 50 to 200 ppm in benzene-specific mode. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Supporting Documentation |
| Docs: Datasheet_UltraRAE3000_DS-1041-05_hires.pdf; |
| Dimensions |
| 3 x 2 in (7.6 x 5 cm) |
| Weight |
| 1.6 lb; (725 g) |
| Power Requirements |
| Lithium Battery; Alkaline Battery; Rechargeable, external field-replaceable lithium-ion battery pack, Alkaline battery adapter, (16 hours) |
| Noise Produced |
| 95 dB |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; IP65 |
| Operating Conditions |
| -20 to 50°C (-4 to 122°F), 0 to 95% RH |
| Consumables |
| <$1,000/year; External filters: dust or moisture and sensors |
| Solvents/Reagents |
| Calibration gases |
| Suggested Routine Maintenance |
| Lamps typically last ~ 6 months |
| Available Accessories |
| Calibration kit, Durable bright red rubber boot |
| Data Analysis Support Equipment |
| Software |
| Communications Interface |
| A data download cable or Bluetooth |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| <5 years; 2 years |
| Unit Cost |
| $4,875.00 |
| Maintenance Cost |
| Lamp replacement $258 |
| Other Chemical Targets |
| Benzene, VOCs |
| Number of Library Entries |
| > 350 |
| Adaptability |
| No; cannot detect or add new targets |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppb; ppm; 0.05 to 10,000 ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| < 1 minute |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); < 2 seconds |
| Total Run Time |
| Continuous monitor |
| Alarm Capability |
| Audible and Visual |
| Software Control |
| On-board; Remote |
| Other Operational Parameters |
| Sample pump draws from up to 100 feet, Sensor and lamp auto-cleaning, Built-in flashlight, Multi-language capability (up to 10 languages) |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Operator’s manual |
| Warranties |
| 1 year. A 4 year extended warranty is available for purchase. 3 years for 10.6 eV lamp, 1 year for 9.8. eV lamp, pump, battery, sensor and instrument. |
| IATA Shipping Restrictions |
| Yes; Calibration gases fall under IATA shipping regulations. Lithium battery restrictions. |
