MultiRAE Pro

The MultiRAE Pro multigas monitor combines a PID (Photoionization Detector) with the standard four gases of a confined space monitor (O2, LEL, and two toxic gas sensors) in one compact monitor with sampling pump.

Notify me on updates of this product 

Availability: Commercially Available

Tom Kochevar
detectgas@honeywell.com
+1 877 723 2878
3775 North First Street
San Jose, CA 65134
USA
www.honeywellanalytics.com
Manufacturer
Honeywell Analytics
Product Name
MultiRAE Pro
Detection Category
Chemical
Detection Principle
Sensors;
Detection Method
Electrochemical Detection; Photoionization Detection ;
Application
Emergency Response; Gas Analysis;
Product Model Number
PGM-6248
Equipment Type
Instrument
Product Synopsis
The MultiRAE Pro multigas monitor combines a PID (Photoionization Detector) with the standard four gases of a confined space monitor (O2, LEL, and two toxic gas sensors) in one compact monitor with sampling pump.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent; Hands-on experience
Dimensions
4.6 x 3.0 x 1.9 in (117 x 76 x 235 mm)
Weight
<1 Lb.; 0.5 kg
Power Requirements
Lithium Battery; NiMH Battery; Alkaline Battery; 3.6 V 3.0 Ah Li ion or 4.8 V 1,4 Ah NiCd battery; 4 AA alkaline battery adapter, field replaceable (10 hr. operating time)
Transportability
Handheld
Ruggedness
Waterproof/Resistant; Extreme Temperatures/Humidity; Constructed of composite material with weatherproof rubber boot
Operating Conditions
–20 to 45°C (–4 to 113°F)
Consumables
>$1,000/year; Sensors, calibration kit, batteries
Solvents/Reagents
None
Calibration Schedule
2-point field calibration for zero and standard reference gas
Suggested Routine Maintenance
Replacement of sensors and other maintenance as required
Available Accessories
Battery adapter, calibration adapter, inlet probe, water trap filter, carbon filters, rubber boot with belt clip, carrying case
Data Analysis Support Equipment
Computer
Communications Interface
Data download to PC and parameter upload from PC. Wireless data transmission option available.
Unit Cost
$3,416.00
Maintenance Cost
4-year repair and replacement contract available for $875
Tested For Chemical Agents
GB, GD, L, GA, Did not detect VX (but may detect if sample is pulled through a silver fluoride conversion pad)
Tested For ITF-25 TIC/TIMs
H2S, SO2, Cl2, HCN, NH3, arsine, CS2, ethylene oxide
Tested For Explosives
Detects LEL of VOC gases
Other Chemical Targets
All volatile VOCs Does not detect phosgene
Radiological Targets
Gamma
Adaptability
No; PID can detect most volatile organic compounds, but must apply a conversion factor for quantitative results. System has replaceable EC cells for customizing to detect specific target analytes.
Sample Introduction
Vapor/Gas
Sensitivity/Detection Limits
ppm
Known Interferents/Inhibitors
PID responds to many organic vapors. May false alarm to heavy concentrations of various smokes and engine exhausts.
False Positive Rates
<5% False Positive and Negative Rate
False Negative Rates
<5% False Positive and Negative Rate
Start Up Time (From Cold Start To Sample Ready)
1 minute
Response Time (Sample Application To Output)
Continuous (<30 seconds)
Total Run Time
Continuous
Alarm Capability
Audible, visual and vibrational
Software Control
Data logger
Other Operational Parameters
Other operational parameters on vendor website.
Training Required
<1 day training
Training Available
Yes
Manuals Available
Operator’s manual
Warranties
Lifetime on unit excluding consumable parts; 1 yr. or 2 yr. on EC sensor depending on type.
IATA Shipping Restrictions
None; Calibration gas cylinder must be shipped per IATA restrictions for compressed gas. Lithium ion battery restrictions.
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: