MultiRAE PGM-50

Improved version of the original PGM-50, the new MultiRAE multigas monitor is offered in three configurations: 1) MultiRAE Pro – same features as MultiRAE, with wireless data streaming capability 2) MultiRAE six-gas monitor with PID detector 3) MultiRAE Lite pumped and diffusion sampling (no PID) All configurations can be configured with over 25 sensor options (such as ppb and ppm PID, NDIR, and exotics) to match the monitoring needs of a variety of applications.

Notify me on updates of this product 

Availability: Discontinued

Tom Kochevar
+1 630 220 5190
3775 North First Street
San Jose, CA 95134
USA
www.raesystems.com
Manufacturer
Honeywell Analytics
Product Name
MultiRAE PGM-50
Detection Category
Chemical;
Detection Principle
Sensors;
Detection Method
Electrochemical Detection; Photoionization Detection ;
Application
Emergency Response; Gas Analysis;
Equipment Type
Instrument
Product Synopsis
Improved version of the original PGM-50, the new MultiRAE multigas monitor is offered in three configurations: 1) MultiRAE Pro – same features as MultiRAE, with wireless data streaming capability 2) MultiRAE six-gas monitor with PID detector 3) MultiRAE Lite pumped and diffusion sampling (no PID) All configurations can be configured with over 25 sensor options (such as ppb and ppm PID, NDIR, and exotics) to match the monitoring needs of a variety of applications.
Availability
Discontinued
Technology Readiness Level (TRL)
9
User Feedback Sources
Hands-on experience
Dimensions
4.6 x 3.0 x 1.9 in (117 x 76 x 235 mm)
Weight
<1 Lb.; 0.5 kg
Power Requirements
Lithium Battery; NiMH Battery; Alkaline Battery; 3.6 V 3.0 Ah Li ion or 4.8 V 1,4 Ah NiCd battery; 4 AA alkaline battery adapter, field replaceable (10 hr. operating time)
Transportability
Handheld
Ruggedness
Waterproof/Resistant; Extreme Temperatures/Humidity; Constructed of composite material with weatherproof rubber boot
Operating Conditions
–20 to 45°C (–4 to 113°F)
Consumables
<$1,000/year; Sensors, calibration kit, batteries
Calibration Schedule
2-point field calibration for zero and standard reference gas
Suggested Routine Maintenance
Replacement of sensors and other maintenance as required
Available Accessories
Battery adapter, calibration adapter, inlet probe, water trap filter, carbon filters, rubber boot with belt clip, carrying case
Communications Interface
Data download to PC and parameter upload from PC. Wireless data transmission option available.
Unit Cost
$3,416.00
Maintenance Cost
4-year repair and replacement contract available for $875
Tested For Chemical Agents
GB, GD, L, GA, Did not detect VX (but may detect if sample is pulled through a silver fluoride conversion pad)
Tested For ITF-25 TIC/TIMs
H2S, SO2, Cl2, HCN, NH3, arsine, CS2, ethylene oxide
Tested For Explosives
Detects LEL of VOC gases
Other Chemical Targets
All volatile VOCs Does not detect phosgene
Adaptability
Yes; user can add new targets to detector with support. PID can detect most volatile organic compounds, but must apply a conversion factor for quantitative results. System has replaceable EC cells for customizing to detect specific target analytes
Sample Introduction
Vapor/Gas
Sensitivity/Detection Limits
ppm
Known Interferents/Inhibitors
PID responds to many organic vapors. May false alarm to heavy concentrations of various smokes and engine exhausts.
Start Up Time (From Cold Start To Sample Ready)
1 minute
Response Time (Sample Application To Output)
<5 minutes; 15 seconds to 3 minutes
Alarm Capability
Audible, visual and vibrational
Software Control
Data logger
Other Operational Parameters
Other operational parameters on vendor website.
Training Required
<1 day training
Training Available
Yes
Manuals Available
Operator’s manual
Warranties
Lifetime on unit excl. consumable parts; 1 yr. or 2 yr. on EC sensor depending on type.
IATA Shipping Restrictions
Yes; lithium ion battery
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: