DL-102+
The DL-102+ Snap-On PID™ Photoionization Analyzer is a single piece, hand-held unit for the measurement of organic and inorganic gas phase species. The Model 102+ is a PID based VOC analyzer that can accommodate 0 to 3 additional sensors (over 30 sensors to choose from). Includes operator's manual and rechargeable nickel metal hydride battery.
Availability: Commercially Available
| Manufacturer |
| PID Analyzers LLC |
| Product Name |
| DL-102+ |
| Detection Category |
| Chemical |
| Detection Principle |
| Molecular Spectroscopy; Sensors; |
| Detection Method |
| Photoionization Detection; Electrochemical Detection; Infrared (IR) Spectroscopy ; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The DL-102+ Snap-On PID™ Photoionization Analyzer is a single piece, hand-held unit for the measurement of organic and inorganic gas phase species. The Model 102+ is a PID based VOC analyzer that can accommodate 0 to 3 additional sensors (over 30 sensors to choose from). Includes operator's manual and rechargeable nickel metal hydride battery. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 8 x 3 x 2.25 in (203 x 76 x 57 mm) |
| Weight |
| <5 lbs.; 1.9 lbs (0.9 kg) |
| Power Requirements |
| AC/DC Line Power; 12 V DC charger with cigarette lighter adapter |
| Transportability |
| Handheld |
| Operating Conditions |
| 5 to 40°C (41 to 104°F); 0 to 95% RH non-condensing |
| Consumables |
| <$1,000/year; Calibration gas, calibration kit: $250 |
| Calibration Schedule |
| Automatic electronic zero provides a reliable calibration point so that when calibrated with a span gas, this is a two-point calibration. Calibration only takes 10 seconds. Optional calibration kit can be purchased |
| Suggested Routine Maintenance |
| Clean and calibrate service/annually: $229 A calibration kit can be purchased for $250. |
| Data Analysis Support Equipment |
| Data logging software |
| Communications Interface |
| RS 232 |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $3,850.00 |
| Maintenance Cost |
| $495 lamp replacement (every 2 to 3 years). Sensors can be added—prices from $175 to $750. |
| Tested For ITF-25 TIC/TIMs |
| VOCs |
| Number of Library Entries |
| Not Specified |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Known Interferents/Inhibitors |
| Solvents may cause interference |
| Start Up Time (From Cold Start To Sample Ready) |
| 10 to 15 seconds |
| Response Time (Sample Application To Output) |
| <1 minute; 1 to 60 seconds |
| Total Run Time |
| < 1 minute |
| Alarm Capability |
| Audible |
| Software Control |
| Downloading software is included with model for Windows HyperTerminal |
| Training Required |
| <1 day training |
| Training Available |
| No |
| Manuals Available |
| Operator’s manual |
| Warranties |
| 1 year |
| IATA Shipping Restrictions |
| Yes; Calibration gases fall under IATA shipping regulations |
