X-5000
The Olympus X-5000 is engineered to provide in-the-field XRF analysis. The X-5000 is offered with two different x-ray tube anode choices. A tantalum (Ta) anode x-ray tube configuration is used for excellent sensitivity measuring 25+ transition metals including Cd, Ag, Au, Pb, Cr, and even Rare Earth Elements. A rhodium (Rh) anode configuration is offered when the application calls for analysis of light elements including Al, Si, S, Mg and P, along with mid-range transition metals. Typical uses for this product are: analysis of liquids, solids or powders for mobile labs or at-line incoming/outgoing material inspections.
Availability: DISCONTINUED
| Manufacturer |
| Olympus Scientific Solutions America |
| Product Name |
| X-5000 |
| Detection Category |
| Chemical; Explosives |
| Detection Principle |
| Elemental Analysis; |
| Detection Method |
| X-ray Fluorescence ; |
| Application |
| Emergency Response; Screening; Bulk Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Olympus X-5000 is engineered to provide in-the-field XRF analysis. The X-5000 is offered with two different x-ray tube anode choices. A tantalum (Ta) anode x-ray tube configuration is used for excellent sensitivity measuring 25+ transition metals including Cd, Ag, Au, Pb, Cr, and even Rare Earth Elements. A rhodium (Rh) anode configuration is offered when the application calls for analysis of light elements including Al, Si, S, Mg and P, along with mid-range transition metals. Typical uses for this product are: analysis of liquids, solids or powders for mobile labs or at-line incoming/outgoing material inspections. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 15 x 13 x 11 in (381 x 331 x 281 mm) |
| Weight |
| <30 Lbs.; 25 Lbs. (11.4 kg) |
| Power Requirements |
| Lithium Battery; AC/DC Line Power; 3 hour Lithium-ion battery pack is optional -Standard AC power: 110–220 VAC, 50–60 Hz, 70W max |
| Noise Produced |
| Negligible |
| Transportability |
| Person-Portable |
| Operating Conditions |
| -10 to 50° C (14 to 122ºF); 10 to 90%RH, noncondensing |
| Consumables |
| <$1,000/year; nalgene sample bottles, sample containers |
| Solvents/Reagents |
| None |
| Calibration Schedule |
| Standardization and test samples are included in the kit for use before sampling |
| Available Accessories |
| Sample guide and holder, Optional battery, charger and AC adaptor |
| Communications Interface |
| USB, Bluetooth |
| Shelf Life |
| >5 years |
| Unit Cost |
| $57,100.00 |
| Other Chemical Targets |
| Modes available include: Soil, Mining, Alloy, Fluids and Consumer Goods |
| Sample Introduction |
| Liquid; Solid |
| Sensitivity/Detection Limits |
| ppm; % |
| Start Up Time (From Cold Start To Sample Ready) |
| 1.5 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); 3 - 12 seconds |
| Total Run Time |
| 3 seconds |
| Software Control |
| Onboard PC, with a large, virtual keyboard; embedded with Pentium processor, Windows XP |
| Training Required |
| <1 day training |
| Training Available |
| Radiation Safety Training |
| Manuals Available |
| Operators Manual, Quick Start Guide |
| Warranties |
| 1 year |
