Spilfyter® Chemical Classifier

The Spilfyter® Chemical Classifier Test Strip detects the following chemical classes: acids and bases, oxidizers, fluoride, petroleum products, organic solvents, iodine, bromine, and chlorine. Color change takes place immediately, and the strip is compared to the color chart to make a determination of the chemical class present. Kit includes test strips, a bobbin of polypropylene thread, and a laminated Chemical Classifier Chart.

Notify me on updates of this product 

Availability: Commercially Available

Connie Anderson
+1 920 983 2220
3303 Spirit Way
Green Bay, WI 54304
USA
www.npscorp.com
Manufacturer
NPS Corporation
Product Name
Spilfyter® Chemical Classifier
Detection Category
Chemical; Explosives
Detection Principle
Colorimetric;
Detection Method
Colorimetric;
Application
Emergency Response; Screening;
Equipment Type
Instrument
Product Synopsis
The Spilfyter® Chemical Classifier Test Strip detects the following chemical classes: acids and bases, oxidizers, fluoride, petroleum products, organic solvents, iodine, bromine, and chlorine. Color change takes place immediately, and the strip is compared to the color chart to make a determination of the chemical class present. Kit includes test strips, a bobbin of polypropylene thread, and a laminated Chemical Classifier Chart.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
Dimensions
1 x 12 x 0.04 in (2.54 x 30.5 x 0.1 cm); paper multi-test strips with separate application sites for each test
Weight
<1 lb.; 0.45 kg
Power Requirements
None
Transportability
Pocket Size
Operating Conditions
Operates in all environments
Expected Operational Life
Single use item
Shelf Life
<5 years; 2 years
Unit Cost
$67.53
Maintenance Cost
Chemical Classifier Test Strips (10/pk) $124
Tested For ITF-25 TIC/TIMs
Yes, indicates the presence of: acid/base, oxidizer, fluoride, petroleum/organic solvent, iodine/bromine/chlorine
Sample Introduction
Liquid
Sensitivity/Detection Limits
pH; ppm
Known Interferents/Inhibitors
Minimal interference problems claimed by vendor
Start Up Time (From Cold Start To Sample Ready)
Immediate
Response Time (Sample Application To Output)
Continuous (<30 seconds)
Total Run Time
< 1 minute
Alarm Capability
Visual identification
Training Required
<1 hour training
Training Available
No
Manuals Available
Instructions and Color Comparison Chart
Reachback Service
None
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: