HazMat Kits
Nextteq HazMat Kits offer on-site identification of unknown chemicals. Gastec Gas Sampling Pumps and Detector Tubes are included in each kit. No calibration, batteries, or electrical power are required. A comprehensive decision chart comes with each kit and provides step-by-step directions to identify gases and vapors. Three kits are available: Deluxe HazMat Kit Model STD-101, Deluxe HazMat Kit (without tubes) Model STD-101-1, and Standard HazMat Kit (tubes only).
Availability: Commercially Available
Derrick
+1 813 249 5888 ext 20
8406 Benjamin Road, Suite J
Tampa, FL 33634
USA
|
|
www.nextteq.com
| Manufacturer |
| Nextteq LLC |
| Product Name |
| HazMat Kits |
| Detection Category |
| Chemical |
| Detection Principle |
| Colorimetric; |
| Detection Method |
| Colorimetric; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| Nextteq HazMat Kits offer on-site identification of unknown chemicals. Gastec Gas Sampling Pumps and Detector Tubes are included in each kit. No calibration, batteries, or electrical power are required. A comprehensive decision chart comes with each kit and provides step-by-step directions to identify gases and vapors. Three kits are available: Deluxe HazMat Kit Model STD-101, Deluxe HazMat Kit (without tubes) Model STD-101-1, and Standard HazMat Kit (tubes only). |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 20 x 16 x 7.5 in (50 x 39 x 19 cm) |
| Weight |
| <30 lbs.; 14 lbs (6.4 kg) |
| Power Requirements |
| None |
| Transportability |
| Person-Portable |
| Operating Conditions |
| 0 to 40°C (32 to 104°F); 0 to 90% RH. |
| Consumables |
| <$1,000/year; Detector tubes and detection papers |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| <5 years; 2 years |
| Unit Cost |
| $1,416.00 |
| Tested For Chemical Agents |
| Yes |
| Tested For ITF-25 TIC/TIMs |
| 48 chemicals, including carbon monoxide, ammonia, benzene, ethyl acetate, hydrogen cyanide, hydrogen sulfide, hydrocarbons, naphtha, Polytec I, Stoddard solvent, and sulfur dioxide. |
| Other Chemical Targets |
| Yes |
| Sample Introduction |
| Vapor/Gas; Liquid |
| Sensitivity/Detection Limits |
| ppm |
| Known Interferents/Inhibitors |
| No false positives from gasoline, diesel fuel, aqueous film forming foam (AFFF), burning tires, or burning wood. |
| Start Up Time (From Cold Start To Sample Ready) |
| Immediate |
| Response Time (Sample Application To Output) |
| <5 minutes; 2 minutes |
| Total Run Time |
| Minutes |
| Alarm Capability |
| Visual |
| Training Required |
| <1 day training |
| Training Available |
| Training simulation kits available for safe, realistic training. Highly trained customer support and technical team available to answer questions. |
| Manuals Available |
| User manual |
| Warranties |
| Pump is warranted for life, tubes for 2 years |
