Pellistor Sensors
Nemoto manufacturer’s and sells a variety of catalytic (pellistor) type flammable gas sensors. These sensors detect and measure the presence of flammable gases and vapors in air, in the range 0-60% of the Lower Explosive Limit (LEL) of the gas or vapor being measured.
Availability: Commercially Available
+31 20 670 3858
Toren-C 6F, Strawinskylaan 647
1077 XX Amsterdam
The Netherlands
|
|
www.nemoto.eu
| Manufacturer |
| Nemoto B.V. |
| Product Name |
| Pellistor Sensors |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Pellistor; |
| Application |
| Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| Nemoto manufacturer’s and sells a variety of catalytic (pellistor) type flammable gas sensors. These sensors detect and measure the presence of flammable gases and vapors in air, in the range 0-60% of the Lower Explosive Limit (LEL) of the gas or vapor being measured. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Transportability |
| Pocket Size |
| Operating Conditions |
| -20 to 60°C temperature <95% Relative Humidity, without dew condensation |
| Other Chemical Targets |
| Combustible Gases, Hydrogen, Ammonia, Acetylene |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| %LEL; 0-60% |
| Known Interferents/Inhibitors |
| See product data sheet for list of interferents |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); < 8 seconds |
| Training Required |
| <1 day training |
| Manuals Available |
| Yes |
