CW Sentry
The CW Sentry Chemical Warfare Agent Detector measures the presence of CWAs and select TICs. The wall-mounted unit uses two separate detector arrays—SAW microsensors and an optional configuration of electrochemical cells—to detect nerve and blister agents, as well as TICs including hydride and halogen. An internal fan draws air into the unit, where it is filtered twice to prevent contamination from dust and dirt. The unit measures the air and transmits the results via a variety of methods, including Ethernet fiber optic lines, while also offering wireless functionality.
Availability: Commercially available
| Manufacturer |
| Mine Safety Appliances Company (MSA) |
| Product Name |
| CW Sentry |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection;Surface Acoustic Wave Detection; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The CW Sentry Chemical Warfare Agent Detector measures the presence of CWAs and select TICs. The wall-mounted unit uses two separate detector arrays—SAW microsensors and an optional configuration of electrochemical cells—to detect nerve and blister agents, as well as TICs including hydride and halogen. An internal fan draws air into the unit, where it is filtered twice to prevent contamination from dust and dirt. The unit measures the air and transmits the results via a variety of methods, including Ethernet fiber optic lines, while also offering wireless functionality. |
| Availability |
| Commercially available |
| Technology Readiness Level (TRL) |
| 9 |
| Market Entry Date |
| 2001 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 24.75 x 19.5 x 9.5 in (62.9 x 49.5 x 24.1 cm) |
| Weight |
| <50 lbs.; 40 lbs (18.1 kg) |
| Power Requirements |
| AC/DC Line Power; 90-240 V, 50/60 Hz (60 watts) |
| Noise Produced |
| None |
| Transportability |
| Benchtop/Fixed |
| Ruggedness |
| Extreme Temperatures/Humidity |
| Operating Conditions |
| -20 to 50°C (-4 to 122°F), 10 to 95% RH, non-condensing |
| Consumables |
| None |
| Communications Interface |
| RS-232, Ethernet, fiber optic, and wireless |
| Expected Operational Life |
| 5 years |
| Shelf Life |
| >5 years; Dependent on sensor |
| Tested For Chemical Agents |
| GA, GB, GD, GF, HD, HN3 |
| Tested For ITF-25 TIC/TIMs |
| Yes |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Known Interferents/Inhibitors |
| Dependent on sensor selected |
| Start Up Time (From Cold Start To Sample Ready) |
| < 5 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); 30 seconds (SAW sensors), 5 seconds (Electrochemical sensors) |
| Total Run Time |
| Seconds |
| Alarm Capability |
| Audible and visible |
| Software Control |
| Yes |
| Training Required |
| <1 week training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| 1 year |
