Metal Detective Lab 1899
For colorimetric determination of metals and alloys. Samples are analyzed by placing a test paper strip against the sample and applying an electric current to the strip. A reagent in the test paper reacts with the sample, causing a color change. The method is non-destructive and large samples can be analyzed in place. This product is intended for intact metal and alloy samples larger than one square inch. Samples may need to be prepared by abrading the surface with emery paper prior to analysis.
Availability: Commercially Available
| Manufacturer |
| Koslow Scientific Company |
| Product Name |
| Metal Detective Lab 1899 |
| Detection Category |
| Chemical |
| Detection Principle |
| Colorimetric; |
| Detection Method |
| Colorimetric; |
| Application |
| Emergency Response; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| For colorimetric determination of metals and alloys. Samples are analyzed by placing a test paper strip against the sample and applying an electric current to the strip. A reagent in the test paper reacts with the sample, causing a color change. The method is non-destructive and large samples can be analyzed in place. This product is intended for intact metal and alloy samples larger than one square inch. Samples may need to be prepared by abrading the surface with emery paper prior to analysis. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 20 x 16 x 14 in (51 x 21 x 36 cm) |
| Weight |
| <30 lbs.; 11 lbs (5 kg) |
| Power Requirements |
| Alkaline Battery; 1.5 V battery (10,000 tests) |
| Transportability |
| Person-Portable |
| Ruggedness |
| None; pelican case, drop sensitive |
| Consumables |
| <$1,000/year; Testing solutions, Test papers, Fiber sheets |
| Solvents/Reagents |
| Acid solution; developing agent |
| Suggested Routine Maintenance |
| Aluminum cylinder cathode should be cleaned occasionally |
| Available Accessories |
| Metal Standards Collection; Metal Fragment ID Kit, Test Paper; Passi-Pads; Fiber Test Sheets; Battery Charger; Power Up Kit |
| Expected Operational Life |
| 10,000 tests |
| Shelf Life |
| <5 years; Testing solutions 3+ years |
| Unit Cost |
| $1,690.00 |
| Maintenance Cost |
| $60 to $200 |
| Other Chemical Targets |
| Elemental metals, including chromium, nickel, molybdenum, copper, cobalt, iron, sulfur, tungsten, vanadium, carbon, titanium, niobium, tantalum, manganese, zinc, cadmium, lead, tin, magnesium, silver, and gold. Also identifies most commonly used alloys, including s.s. 304, 316, 321, 347, Monels, Inconels, Hastelloys, Stellite Haynes, cast irons, and others. |
| Radiological Targets |
| Gamma |
| Sample Introduction |
| Solid |
| Sensitivity/Detection Limits |
| % |
| Start Up Time (From Cold Start To Sample Ready) |
| Seconds |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); <30 seconds |
| Total Run Time |
| < 5 minutes |
| Other Operational Parameters |
| Energy range: 30 keV to 3.0 MeV |
| Training Required |
| <1 day training |
| Training Available |
| No |
| Manuals Available |
| Yes |
| Reachback Service |
| No |
| Warranties |
| 1 year |
| IATA Shipping Restrictions |
| Yes; reagents are likely restricted to ground transport only |
