M40•M Multi-Gas Monitor
The M40•M multi-sensor monitor is designed for use in mines and other work environments to assure optimum personal protection against oxygen (O2) deficiency and enrichment, hazardous levels of methane gas (CH4), as well as toxic levels of carbon monoxide (CO) and, if applicable, hydrogen sulfide (H2S). The M40•M is housed in a rugged, impact resistant case to provide durability in harsh environments.
Availability: DISCONTINUED
+1 412 788 4353
1001 Oakdale Road
Oakdale, PA 15071
USA
|
|
www.indsci.com
| Manufacturer |
| Industrial Scientific Corporation |
| Product Name |
| M40•M Multi-Gas Monitor |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The M40•M multi-sensor monitor is designed for use in mines and other work environments to assure optimum personal protection against oxygen (O2) deficiency and enrichment, hazardous levels of methane gas (CH4), as well as toxic levels of carbon monoxide (CO) and, if applicable, hydrogen sulfide (H2S). The M40•M is housed in a rugged, impact resistant case to provide durability in harsh environments. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 4.30 × 2.45 × 1.37 in (10.9 x 6.2 x 3.5 cm) |
| Weight |
| <1 lb.; 8.6 oz (244 g) |
| Power Requirements |
| Lithium Battery; Rechargeable lithium-ion integral battery |
| Transportability |
| Pocket Size |
| Ruggedness |
| Extreme Temperatures/Humidity |
| Operating Conditions |
| –20 to 50°C (–4 to 122°F) |
| Consumables |
| <$1,000/year; Calibration gas |
| Calibration Schedule |
| Yes |
| Shelf Life |
| <5 years; 4 years |
| Unit Cost |
| $645.00 |
| Maintenance Cost |
| 4 gas calibration kit $253 every 12 months and a regulator for $150. |
| Tested For ITF-25 TIC/TIMs |
| The M40 is available in a 1-, 2-, 3-, or 4-gas configuration including oxygen, hydrogen sulfide, carbon monoxide, and combustibles/hydrocarbons |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm; %LEL |
| Known Interferents/Inhibitors |
| Many chemicals could potentially cause a false alarm. |
| Start Up Time (From Cold Start To Sample Ready) |
| 20 seconds |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds); 10 to 20 seconds |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
