BM25
The BM25 monitors from one to five gases through diffusion or sample draw. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls, and mobile or short-term work in areas where fixed detection systems are not suitable.
Availability: DISCONTINUED
+1 412 788 4353
1001 Oakdale Road
Oakdale, PA 15071
USA
|
|
www.indsci.com
| Manufacturer |
| Industrial Scientific Corporation |
| Product Name |
| BM25 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The BM25 monitors from one to five gases through diffusion or sample draw. Designed for team protection or area surveillance, the unit is most suitable for perimeter monitoring, rig overhauls, and mobile or short-term work in areas where fixed detection systems are not suitable. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 16.7 x 6.3 x 5.1 in (42 x 16 x 13 cm) |
| Weight |
| <30 lbs.; 15 lbs (6.8 kg) |
| Power Requirements |
| NiMH Battery; 100 hours |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity |
| Operating Conditions |
| –20 to 50°C (–4 to 122°F) |
| Consumables |
| <$1,000/year; Calibration gas, sensors |
| Solvents/Reagents |
| Calibration gas |
| Calibration Schedule |
| Monthly |
| Suggested Routine Maintenance |
| Replacement of sensors |
| Available Accessories |
| Optional datalink adapter enables the instrument to store or log the recorded gas readings |
| Data Analysis Support Equipment |
| PC |
| Communications Interface |
| USB Adapter Cable |
| Expected Operational Life |
| 10 years |
| Shelf Life |
| <5 years; Some sensors expire in 18 to 24 months. Some sensors last 3 to 5 years. |
| Unit Cost |
| $5,198.00 |
| Maintenance Cost |
| $150 to $650 depending on the sensor |
| Tested For ITF-25 TIC/TIMs |
| O2, CO, H2S, C2H4O, SO2, NO, NO2, HCN, HCl, Cl2, ETO, PH3, AsH3, SiH4, CO2, H2, NH3 sensors available. |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Known Interferents/Inhibitors |
| Many chemicals are capable of causing a false positive |
| Start Up Time (From Cold Start To Sample Ready) |
| 30 seconds |
| Response Time (Sample Application To Output) |
| <5 minutes; 30 to 90 seconds |
| Total Run Time |
| < 3 minutes |
| Alarm Capability |
| Visual and audible |
| Software Control |
| On-board, PC |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| 1 year |
| Approved Vendors |
| Grainger; Hagemeyer; Orr Safety Corp.; Wilson Supply Co. |
