Signalpoint Toxic Sensor
Toxic and oxygen versions of Signalpoint provide a local LED indication of their status; periodic green flash (OK), flashing amber (warning) and flashing red (alarm). Seconds count and so the front end sensor design ensures fast speed of response even with ‘sticky’ gases
Availability: Commercially Available
| Manufacturer |
| Honeywell Analytics |
| Product Name |
| Signalpoint Toxic Sensor |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection ; |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| Toxic and oxygen versions of Signalpoint provide a local LED indication of their status; periodic green flash (OK), flashing amber (warning) and flashing red (alarm). Seconds count and so the front end sensor design ensures fast speed of response even with ‘sticky’ gases |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 5.9 x 4.2 x 3.6 in (150 x 105 x 91 mm) |
| Weight |
| <5 Lbs.; 1.03 Lbs. (465 g) |
| Power Requirements |
| AC/DC Line Power; 18 to 30 V, Maximum Power Consumption 0.9 W |
| Transportability |
| Pocket Size |
| Ruggedness |
| None |
| Operating Conditions |
| 20 to 40°C (68 to 105°F); 90 to 110 kPa Operating Pressure; 20 to 90%RH |
| Consumables |
| None |
| Solvents/Reagents |
| None |
| Tested For ITF-25 TIC/TIMs |
| Chlorine, Hydrogen Sulfide, Ammonia |
| Other Chemical Targets |
| Oxygen and Carbon Monoxide |
| Adaptability |
| No; cannot detect or add new targets |
| Sample Introduction |
| Vapor/Gas |
| Start Up Time (From Cold Start To Sample Ready) |
| 3 to 5 minutes |
| Response Time (Sample Application To Output) |
| <1 minute |
| Alarm Capability |
| Visual |
| Training Required |
| <1 week training |
| Manuals Available |
| Yes |
