Sensepoint HT Sensor

The Sensepoint high temperature sensor has been designed for the detection of combustible gases in high temperature hazardous area locations. Typical applications include turbine enclosures and drying ovens used in solvent based printing and coating machines. These applications require a sensor that provides reliable and stable detection allowing low level alarm settings across a wide temperature range. Utilizing a specially matched pair of Sieger poison resistant combustible gas detection elements, the Sensepoint High Temperature Sensor has a very stable baseline allowing alarm trip points to be set as low as 5% LEL across a temperature range of -40°C to +150°C (-40°F to +302°F). The gas measuring range can be configured from 0-20% LEL up to 0-100% LEL depending on the type of controller used.

Notify me on updates of this product 

Availability: Commercially Available

+1 847 955 8200
405 Barclay Boulevard
Lincolnshire, IL 60069
www.honeywellanalytics.com/
Manufacturer
Honeywell Analytics
Product Name
Sensepoint HT Sensor
Detection Category
Chemical
Detection Principle
Sensors;
Detection Method
Electrochemical Detection ;
Application
Emergency Response; Gas Analysis;
Equipment Type
Sensor
Product Synopsis
The Sensepoint high temperature sensor has been designed for the detection of combustible gases in high temperature hazardous area locations. Typical applications include turbine enclosures and drying ovens used in solvent based printing and coating machines. These applications require a sensor that provides reliable and stable detection allowing low level alarm settings across a wide temperature range. Utilizing a specially matched pair of Sieger poison resistant combustible gas detection elements, the Sensepoint High Temperature Sensor has a very stable baseline allowing alarm trip points to be set as low as 5% LEL across a temperature range of -40°C to +150°C (-40°F to +302°F). The gas measuring range can be configured from 0-20% LEL up to 0-100% LEL depending on the type of controller used.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
Dimensions
1.7 x 2.3 in (42 x 58 mm)
Weight
<1 lb.; 7.9 oz (225 g)
Power Requirements
AC/DC Line Power; 0.7 W at 200 mA
Transportability
Pocket Size
Ruggedness
Extreme Temperatures/Humidity
Operating Conditions
-55 to 150°C (-67 to 302°F); 75 to 110 kPa Operating Pressure; 20 to 90%RH
Calibration Schedule
Yes
Communications Interface
3 wire mV bridge output
Shelf Life
>5 years
Other Chemical Targets
Combustible Gases
Sample Introduction
Vapor/Gas
Sensitivity/Detection Limits
%LEL
Start Up Time (From Cold Start To Sample Ready)
30 minutes
Response Time (Sample Application To Output)
Continuous (<30 seconds); T(60)< 6 seconds, T(90)< 10 seconds
Alarm Capability
Yes
Software Control
Yes
Training Required
<1 week training
Manuals Available
Yes
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: