MiniMAX XT
MiniMAX XP provides continuous gas readings, TWA/STEL and two instantaneous alarms with peak hold facility. Built-in Cell Decay Compensation extends the time between calibrations to 12 months. With typical sensor life in excess of two years and three-year battery life, operational costs are minimized. Batteries and sensors can be easily replaced by the user.
Availability: DISCONTINUED
| Manufacturer |
| Honeywell Analytics |
| Product Name |
| MiniMAX XT |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors; |
| Detection Method |
| Electrochemical Detection; |
| Application |
| Gas Analysis; |
| Equipment Type |
| Sensor |
| Product Synopsis |
| MiniMAX XP provides continuous gas readings, TWA/STEL and two instantaneous alarms with peak hold facility. Built-in Cell Decay Compensation extends the time between calibrations to 12 months. With typical sensor life in excess of two years and three-year battery life, operational costs are minimized. Batteries and sensors can be easily replaced by the user. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 3.6 x 2 x 1.1 in (9.1 x 5.1 x 2.8 cm) |
| Weight |
| <1 lb.; 2.8 oz to 3.3 oz (79 g to 94 g) |
| Power Requirements |
| Lithium Battery; 3.0 V replaceable Lithium battery |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity |
| Operating Conditions |
| –20 to 50°C (–4 to 122°F) |
| Consumables |
| <$1,000/year; Sensor replacement every 2 years |
| Calibration Schedule |
| Annually |
| Suggested Routine Maintenance |
| Calibration equipment can be purchased for ~ $100. |
| Shelf Life |
| <5 years; 2 years |
| Unit Cost |
| $219.00 |
| Maintenance Cost |
| Sensors replacement ~ $200 |
| Tested For Chemical Agents |
| No |
| Tested For ITF-25 TIC/TIMs |
| Hydrogen sulfide, sulfur dioxide, chlorine, hydrogen cyanide, and ammonia |
| Tested For Explosives |
| No |
| Tested For Narcotics |
| No |
| Other Chemical Targets |
| Oxygen, carbon monoxide, nitrogen dioxide, and hydrogen |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| Less than 1 minute |
| Response Time (Sample Application To Output) |
| <5 minutes; 10 seconds to 2 minutes |
| Alarm Capability |
| Audible, visual, vibrational |
| Training Required |
| <1 day training |
| Training Available |
| Technical manual for self training |
| Manuals Available |
| User manual |
| Warranties |
| 2 years |
