RanidPro200
RanidPro200 is a neutron and gamma radiation detector that gives the user a reading of the results in real-time. Features include: Remote control through a smart phone interface, inconspicuous design, low false alarm rate and intuitive user interface.
Availability: Commercially Available
| Manufacturer |
| Environics Oy |
| Product Name |
| RanidPro200 |
| Detection Category |
| Radiological/Nuclear |
| Detection Principle |
| Scintillation Detectors; |
| Detection Method |
| Scintillation Detectors; |
| Application |
| Personal Radiation Detectors; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| RanidPro200 is a neutron and gamma radiation detector that gives the user a reading of the results in real-time. Features include: Remote control through a smart phone interface, inconspicuous design, low false alarm rate and intuitive user interface. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 19.7 x 11.8 x 7.9 in (50 x 30 x 20 cm) |
| Weight |
| <30 Lbs.; 15.2 Lbs. (6.9 kg) |
| Power Requirements |
| Lithium Battery; Uses Toughbook CF-19 internal battery 100-240 V 50/60 Hz; AC/DC Line Power |
| Transportability |
| Handheld |
| Ruggedness |
| Extreme Temperatures/Humidity; Not militarized, drop sensitive |
| Operating Conditions |
| –20 to 50°C (-4 to 122°F); <90%RH, non-condensing |
| Consumables |
| None |
| Available Accessories |
| RJ-45 Ethernet LAN Optional with hot swappable battery; Other detector sizes |
| Data Analysis Support Equipment |
| Remote control unit |
| Communications Interface |
| RJ45 Ethernet LAN or WLAN Bluetooth 3G or GSM/GPRS Integrated GPS |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $49,495.00 |
| Radiological Targets |
| Gamma, Neutron |
| Number of Library Entries |
| N42.34 ANSI isotope lists |
| Sample Introduction |
| Radioactive Particle |
| Sensitivity/Detection Limits |
| Sv; mSv/h |
| False Positive Rates |
| Very low false alarm rate |
| Start Up Time (From Cold Start To Sample Ready) |
| < 2 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Audible |
| Software Control |
| Remote |
| Other Operational Parameters |
| Energy Range: 30 keV to 3 MeV Energy Resolution: <3% FWHM @ 662 keV. LaBr3 and NaI(TI) scintillator. |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| User's Manual |
| Reachback Service |
| Yes |
| Warranties |
| 1 year |
| Approved Vendors |
| Gases 101 |
