ChemProDM
The ChemProDM is a detector module that uses open loop IMS technology for fixed applications where local user interface and built-in rechargeable battery are not needed. The Detector Module is controlled via RS-232/485 serial communications. The ChemProDM samples continuously and does not need a clear-down mode which can interrupt sampling.
Availability: Commercially Available
| Manufacturer |
| Environics Oy |
| Product Name |
| ChemProDM |
| Detection Category |
| Chemical; Explosives |
| Detection Principle |
| Spectrometry; |
| Detection Method |
| Ion Mobility Spectrometry ; |
| Application |
| Emergency Response; Gas Analysis; Screening; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The ChemProDM is a detector module that uses open loop IMS technology for fixed applications where local user interface and built-in rechargeable battery are not needed. The Detector Module is controlled via RS-232/485 serial communications. The ChemProDM samples continuously and does not need a clear-down mode which can interrupt sampling. |
| Availability |
| Commercially Available |
| Technology Readiness Level (TRL) |
| 9 |
| Market Entry Date |
| 2010 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 5.1 x 3.5 x 2.4 in (13 x 9 x 6 cm) |
| Weight |
| <5 Lbs.; 2.2 Lbs. (1 kg) |
| Power Requirements |
| AC/DC Line Power; Vehicle power: 9 to 36 VDC |
| Transportability |
| Benchtop/Fixed |
| Ruggedness |
| Extreme Temperatures/Humidity; Waterproof/Resistant; Dust; Vibration/Shock; MIL-STD-461E and 810E compliant and weatherproof |
| Operating Conditions |
| -30 to 55°C (-22 to 131°F) |
| Consumables |
| None |
| Calibration Schedule |
| Confidence check only |
| Suggested Routine Maintenance |
| Filters and pumps |
| Data Analysis Support Equipment |
| PC, software |
| Communications Interface |
| RS-232/485 |
| Expected Operational Life |
| Indefinite |
| Shelf Life |
| >5 years |
| Unit Cost |
| $13,000.00 |
| Maintenance Cost |
| Minimal |
| Tested For Chemical Agents |
| Yes |
| Tested For ITF-25 TIC/TIMs |
| Yes |
| Tested For Explosives |
| Yes |
| Tested For Narcotics |
| Yes |
| Other Chemical Targets |
| Storage for up to 20 libraries with 50 compounds each |
| Number of Library Entries |
| New libraries can be downloaded to the device via serial port by using a PC-based user interface program |
| Adaptability |
| Yes; manufacturer can add new targets to detector |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| 60 to 90 seconds |
| Response Time (Sample Application To Output) |
| <1 minute; 4 to 60 seconds |
| Total Run Time |
| Continuous |
| Alarm Capability |
| Yes |
| Software Control |
| PC |
| Training Required |
| <1 day training |
| Training Available |
| Yes |
| Manuals Available |
| Yes |
| Warranties |
| 5 year |
| ITAR/EAR Export Regulations |
| Yes; Department of Commerce (SNAP-R) regulates and restricts shipping to certain countries. ECCN# 1A004 |
| IATA Shipping Restrictions |
| Yes; Department of Commerce (SNAP-R) regulates and restricts shipping to certain countries. ECCN# 1A004 |
