Multi-PID 2
The Dräger Multi-PID 2 is a photoionization detector for volatile organic compounds (VOCs). Equipped with a standard 10.6 eV UV lamp the Dräger Multi-PID 2 covers a measuring range from 0 to 2,000 ppm. An optional dilution probe extends the measuring range up to 20,000 ppm. The Multi PID 2 has up to 70 substances saved in the device with capacity for up to 60 more.
Availability: DISCONTINUED
+1 800 437 2437
7256 South Sam Houston Parkway, Suite 100
Houston, TX 77085
USA
|
+49 451 8835
Moislinger Allee 53-70
23573 Lübeck
Germany
|
www.draeger.com
| Manufacturer |
| Dräger Safety, Inc. |
| Product Name |
| Multi-PID 2 |
| Detection Category |
| Chemical |
| Detection Principle |
| Sensors |
| Detection Method |
| Photoionization Detection |
| Application |
| Emergency Response; Gas Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| The Dräger Multi-PID 2 is a photoionization detector for volatile organic compounds (VOCs). Equipped with a standard 10.6 eV UV lamp the Dräger Multi-PID 2 covers a measuring range from 0 to 2,000 ppm. An optional dilution probe extends the measuring range up to 20,000 ppm. The Multi PID 2 has up to 70 substances saved in the device with capacity for up to 60 more. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 9 x 4.25 x 3 in (22.9 x 10.8 x 7.6 cm) |
| Weight |
| <5 Lbs.; 1.9 Lbs. (0.860 kg) |
| Transportability |
| Handheld |
| Operating Conditions |
| Susceptible to extreme temperatures. High humidity could cause instrument malfunction |
| Calibration Schedule |
| Performed by the user before each use |
| Suggested Routine Maintenance |
| Lamp needs to be changed periodically. 10.6 V lamp $469. |
| Communications Interface |
| Gas vision software |
| Shelf Life |
| <6 months; 3 to 6 months |
| Unit Cost |
| $4,450.00 |
| Maintenance Cost |
| 469 |
| Tested For Chemical Agents |
| Yes |
| Tested For ITF-25 TIC/TIMs |
| The built-in gas library holds up to 70 substances. Another 60 substances are identified and can be substituted in the library. |
| Tested For Explosives |
| Not Specified |
| Other Chemical Targets |
| The built-in gas library holds up to 70 substances. Another 60 substances are identified and can be substituted in the library. |
| Adaptability |
| Yes; manufacturer can add new targets to detector |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Start Up Time (From Cold Start To Sample Ready) |
| 10 minutes |
| Response Time (Sample Application To Output) |
| Continuous (<30 seconds) |
| Alarm Capability |
| Audible and visual |
| Software Control |
| The data logging feature allows the operator to record 15,000 sampling points which can be downloaded to a PC. |
| Training Required |
| <1 day training |
| Training Available |
| Training manual |
| Manuals Available |
| Operator's manual and technical manual |
