HazMat Simultest Kit
Designed for municipal fire services and other emergency responders, this kit identifies and quantifies chemical substances using the Dräger Simultaneous Test Sets. The Haz-Mat Simultest Kit includes three Simultaneous Test Set Kits for measuring 15 different organic and inorganic chemicals and/or chemical families. Each set requires a one-minute analysis time, and the entire process takes less than 5 minutes to complete. The Haz-Mat Simultest Kit comes with an Accuro pump, 10 Simultaneous Test Sets, Test Set adapters, laminated instruction sheets, and an Air Current Kit. All kit components are packaged in a Pelican case.
Availability: DISCONTINUED
+1 800 437 2437
7256 South Sam Houston Parkway, Suite 100
Houston, TX 77085
USA
|
+49 451 8833
Moislinger Allee 53-68
23571 Lübeck
Germany
|
www.draeger.com
| Manufacturer |
| Dräger Safety, Inc. |
| Product Name |
| HazMat Simultest Kit |
| Detection Category |
| Chemical |
| Detection Principle |
| Colorimetric |
| Detection Method |
| Colorimetric |
| Application |
| Emergency Response; Screening; Bulk Analysis; Trace Analysis; |
| Equipment Type |
| Instrument |
| Product Synopsis |
| Designed for municipal fire services and other emergency responders, this kit identifies and quantifies chemical substances using the Dräger Simultaneous Test Sets. The Haz-Mat Simultest Kit includes three Simultaneous Test Set Kits for measuring 15 different organic and inorganic chemicals and/or chemical families. Each set requires a one-minute analysis time, and the entire process takes less than 5 minutes to complete. The Haz-Mat Simultest Kit comes with an Accuro pump, 10 Simultaneous Test Sets, Test Set adapters, laminated instruction sheets, and an Air Current Kit. All kit components are packaged in a Pelican case. |
| Availability |
| DISCONTINUED |
| Technology Readiness Level (TRL) |
| 9 |
| User Feedback Sources |
| Indifferent/No user feedback |
| Dimensions |
| 19.25 × 15.5 × 7.5 in (489 x 394 x 191 mm) |
| Weight |
| <30 Lbs.; 15 Lbs. (6.8 kg) |
| Power Requirements |
| None |
| Transportability |
| Person-Portable |
| Operating Conditions |
| 10 to 30°C (50 to 86°F) |
| Solvents/Reagents |
| Yes |
| Expected Operational Life |
| Detector tubes are single-use only |
| Shelf Life |
| <5 years; 2 years |
| Unit Cost |
| $2,620.00 |
| Tested For Chemical Agents |
| Not Specified |
| Tested For ITF-25 TIC/TIMs |
| Arsine, chlorine, hydrogen cyanide, phosgene, carbon monoxide, hydrogen selenide, phosphine, perchloroethylene, toluene, hydrocarbons, acetone, alcohols, and trichloroethylene |
| Other Chemical Targets |
| Yes; see product literature on vendor website |
| Adaptability |
| No; cannot detect or add new targets |
| Sample Introduction |
| Vapor/Gas |
| Sensitivity/Detection Limits |
| ppm |
| Known Interferents/Inhibitors |
| Tube dependent |
| Start Up Time (From Cold Start To Sample Ready) |
| 1 minute |
| Response Time (Sample Application To Output) |
| <1 minute; per tube |
| Alarm Capability |
| No |
| Training Required |
| <1 hour training |
| Training Available |
| Training CDs |
| Manuals Available |
| Operator's manual and matrix charts |
| Warranties |
| 5 years (pump) |
