Dräger XS

Designed mostly for use with the multi-gas Dräger X-am 7000, A few sensors require use with the single gas Dräger X-am 5100, and Dräger Pac III S / E*. These miniaturized electrochemical sensors enable a small, ergonomic instrument design. The sensor sits right behind a replaceable dust and water filter which protects it from outside influences, and yet has a negligible effect on response times. Like accuracy and reliability, response time is a crucial factor. The t90 to t20 times provide information about how quickly the sensor responds to changes in gas concentration. Their fast response times and very small diffusion paths enable these sensors to react extremely quickly.

Notify me on updates of this product 

Availability: Commercially Available

+1 800 437 2437
7256 South Sam Houston Parkway, Suite 100
Houston, TX 77085
USA
+49 451 8827
Moislinger Allee 53-62
23565 Lübeck
Germany
www.draeger.com
Manufacturer
Dräger Safety, Inc.
Product Name
Dräger XS
Detection Category
Chemical
Detection Principle
Sensors
Detection Method
Electrochemical Detection
Application
Emergency Response; Gas Analysis;
Equipment Type
Sensor
Product Synopsis
Designed mostly for use with the multi-gas Dräger X-am 7000, A few sensors require use with the single gas Dräger X-am 5100, and Dräger Pac III S / E*. These miniaturized electrochemical sensors enable a small, ergonomic instrument design. The sensor sits right behind a replaceable dust and water filter which protects it from outside influences, and yet has a negligible effect on response times. Like accuracy and reliability, response time is a crucial factor. The t90 to t20 times provide information about how quickly the sensor responds to changes in gas concentration. Their fast response times and very small diffusion paths enable these sensors to react extremely quickly.
Availability
Commercially Available
Technology Readiness Level (TRL)
9
User Feedback Sources
Indifferent/No user feedback
Dimensions
3.3 x 2.5 x 1.0 in (83.8 x 63.5 x 15.4 mm)
Weight
<1 Lb.
Power Requirements
Lithium Battery; Rechargeable; with instrument
Transportability
Pocket Size
Ruggedness
Extreme Temperatures/Humidity
Operating Conditions
-40 to 50°C (-40 to 122°F); 10 to 90%RH. 700 to 1300 hPa (Pressure)
Consumables
None
Solvents/Reagents
None
Calibration Schedule
Yes
Available Accessories
None
Data Analysis Support Equipment
Charging accessories Dräger Bump Test Station Dräger CC-Vision/Pac-Vision Printer Set for Dräger Bump Test Station Data logger - can be read out via IR > 1000 h at a recording interval of 1 value per minute
Communications Interface
IBM compatible PC: Windows XP, and Windows 7 1 available USB port with appropriate adapters, or combination
Shelf Life
>5 years
Other Chemical Targets
Amines, chlorine dioxide, carbon monoxide, hydrogen, hydrogen sulfide, hydrogen peroxide, hydrazine, hydride like hydrogen phosphide, arsine, nitrogen monoxide, sulfur compounds like tetrahydrothiophene, methylmercapten, ethylmercaptan, ethene, propene, organic gases and vapors like ethylene oxide, styrene isobutylene, oxygen, chlorine, hydrogen cyanide, hydrogen chloride / hydrogen fluoride, phosgene, ammonia, nitrogen dioxide, sulfur dioxide, phosphine, and organic gases and vapors like ethylene oxide and hydrogen phosphide.
Sample Introduction
Vapor/Gas
Sensitivity/Detection Limits
ppm
Known Interferents/Inhibitors
Several and varied, depending on the sensor. Interferents are listed in specific sensor data sheets, provided with sensor
Start Up Time (From Cold Start To Sample Ready)
< 18 hours
Response Time (Sample Application To Output)
<5 minutes; < 180 seconds
Alarm Capability
Audible, Visual and vibrational
Software Control
Communication accessories: Dräger CC-Vision/Pac-Vision Printer Set for Dräger Bump Test Station
Other Operational Parameters
Dräger Bump Test Station
Training Required
<1 week training
Training Available
Yes
Manuals Available
Yes
Reachback Service
No
Warranties
3 years
Please enter contact info.
Email Address: 
Company: 
Name: 
Title: